Company Logo

• 목록
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are a great option for modern homes. They are durable, long-lasting and easy to maintain. Unlike timber and upvc window repairs aluminium, they do not corrosion or rot.

Cleaning and lubricating regularly UPVC windows and doors is crucial. This will help prevent costly repairs and improve the efficiency of energy.

1. Broken Glass

The damaged glass in your windows could cause serious damage to your home and may even be fatal. It is important to make sure that your windows are in good shape.

For single pane windows it is fairly easy to replace them, and the replacement is usually able to fit into the old frame very easily. If you have double-paned windows that are held together by internal beading, it will be difficult to remove and replace the old panes. In this situation you'll need to find some plastic spacers to aid the new pane in being able to fit perfectly into the window frame.

If you're planning to attempt to remove the window panes yourself, it is essential to wear the appropriate safety equipment that includes gloves with a thick layer of material and eye protection. It is also recommended to lay down a dropcloth before you begin working on the window panes so that any shards of glass fall onto the fabric, not onto the floor, where they could be trampled.

It's a great idea to tape the gap once the glass is removed. This will prevent water and drafts from entering your property until a professional arrives to fix the window. This will also provide a barrier to prevent any intruders from getting into your home. If the gap is large, you might want to consider using the security door with an integrated window, as it will provide the best of both worlds.

2. Sagging

Upvc is a long-lasting and energy efficient alternative to timber sash window. However, with time, they can suffer from a variety of problems including sliding. A sagging window can cause problems with light, draughts, and even security. If you find that your uPVC window is beginning to shrink, it's crucial to act fast to prevent the problem from getting worse.

Repositioning the hinges could aid in fixing a window that is sliding. You'll first need to open the windows to access the frame. With an screwdriver, unscrew the top and bottom hinges and adjust them by turning them clockwise or counter-clockwise. Once you've adjusted the hinges, shut your window and test it for an appropriate fit. If you're happy with the fit, tighten the screws to ensure that they remain in the right place.

If you can't reposition the hinges, you might need to replace the seal. Seals made of rubber can dry out and lose their elasticity over time, leading them to loose their elasticity. If this happens, it's crucial to replace the seal as fast as possible to ensure your uPVC windows remain watertight and safe from drafts.

uPVC handles may also loosen up. This is typically caused by screws that have been removed over time, but it could be due to the mechanism of the handle wears out. It's relatively simple to repair a loose uPVC handle. The first step is to close the window and then perform a test to ensure that it fits. The corners of the sash must be aligned with the casing joint. If it isn't then you can use a screwdriver to loosen the handle and then turn the mechanism back into position.

3. Water Leaks

It is essential to take action if you awake each day to discover mouldy walls and wet floors. Windows that leak water do not only lead to the degrading of the structure of your home but also hinder your efforts to regulate the temperature in your home. Most often, uPVC window leaks are caused by a lack or damage to the sealant.

This is a simple fix that can be done by any DIYer who is competent. Based on the severity of the problem the caulking used previously may need to be removed before a new layer of caulk is applied. It is crucial to remember that when it comes to uPVC window repairs, you should avoid the temptation to "over-caulk and then make the area more difficult to clean and can decrease the efficiency of your energy usage.

Verify that the drainage holes are free of debris inside them and that the sill pan is properly angled to drain away from the window. In more serious cases you might need to consider replacing the window.

Mold spots and rotten sills are also signs of water leakage. This mold thrives in damp environments and can quickly spread throughout the house.

If the leakage is occurring between the double-glazed window, it is more likely the problem is with the seal than the frame. It is also possible to be repaired by a uPVC window specialist who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be at fault if your uPVC window repairs is difficult to open or if it blows open with a breeze. Any competent DIYer can replace the hinges in a matter of minutes.

Like all mechanical parts hinges are prone to wear out over time. It's easy to change a window hinge, but it's easier if someone helps you hold the frame.

It is also important to ensure that the uPVC hinges are opening and closed in the right direction. Look for the arrows that are on each hinge to determine which way the window should be opened.

The issue could be caused due to opening the window in the wrong way or due to a poor installation at the factory. Sending us photos via our website is often enough to solve the issue. We are happy to offer advice.

It is also crucial to ensure that the hinges are lubricated on a regular basis. This can be done by applying a light engineering oil to the hinges. We recommend using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. It can also reduce the possibility of a window sticking and help prevent corrosion. It is recommended to do this at least once a year. WD40 or other solvent-based oils are not recommended as they can cause damage to your uPVC windows.

5. Draughts

Draughts can be caused by several different things. The hinges may also become misaligned due to wear, causing an opening where the sash meets frame. They can be repaired by giving them a thorough clean, however if they are beyond repair it may be necessary to get them realigned or replaced. Second, the interlock can also become unbalanced. It is located on the hinge's side, and may need to be cleaned. In certain instances, it may be necessary to replace them.

These seals are susceptible to wear and tear or get damaged over time, allowing air to escape. Replacing these with high-quality weatherstripping can help prevent draughts. Replace the windows made of upvc with low-emissivity lenses. This will help regulate indoor temperatures, and reduce the risk of draughts.

Another, and most effective ways to reduce the draughts in your home is to use an draught excluder. These are usually fabric tubes that are filled with some kind of filler. They can be put on the windowsill on top. These will keep your home warm by blocking out cold air.

The windows made of upvc can keep providing excellent insulation and security in your home with regular maintenance and repairs. It is crucial to keep in mind that all windows will eventually get worn out and it is more cost-effective to replace them instead of fixing them. So, if you're experiencing issues with your Upvc windows, it is always recommended to seek assistance from a professional immediately.