Company Logo

• 목록
• 게시판 리스트 옵션
  • 수정
  • 삭제

How to Replace upvc window Handle a UPVC Window Handle

If the window handle of your upvc is damaged, don't be concerned. Replacing the upvc handle on the window is a simple task that can be done in just a few simple steps.

It doesn't matter if you have an in-line or a crank espagnolette window handle each one has an oval spindle protruding out of the back plate. The spindle is placed into the locking device.

Find out the type of lock and handle

Over time window handles and locks can become damaged or lose their functionality. It is possible to repair this issue without replacing the entire uPVC unit. One of the first things you need to do is identify the type of handle and lock you have, as this will determine what replacement parts you will need.

Identifying the type of handle can be identified by looking at the handle's base. There will be an anchoring screw or pin that holds the handle to its base. If the screw is gone, it could be an indication that the handle is separated from the base section. If the handle has split internally and does not hold onto the spindle anymore It could also be a sign that the handle must be replaced.

There are a variety of uPVC handles however the Espag handle is the most well-known. They are usually fixed by two bolts and feature an articulating spindle that is connected to the lock mechanism inside the frame of the window. These handles are commonly used on tilt and turn uPVC windows.

Cockspur handles are a different kind of uPVC handle. They're similar to Espag handles, but have smaller projections from the frame. These handles are usually used on older uPVC windows.

Finally, there are also Venetian window handles, which are similar to the Espag handle but they have an elongated base that allows them to be positioned in a flush position with the frame. These are a great choice for homeowners who want a stylish, elegant handle that blends with their uPVC window frames. The handles are also available in a large selection of colors to fit any style.

Find the spindle's measurement.

It's important to know how the handle is installed before you can order a replacement. This will determine how tight or loose it is and if it will be able to fit into the window frame. It is done by identifying the kind of handle you own and determining the spindle length. The spindle is a steel shaft that connects your handle to the lock inside the window frame. It's available in various sizes and the current industry standard being 8mm. Older handles might have a cross-section of 9mm so you'll need to measure your old handle to ensure that you have the correct size replacement.

There are several types of window handles, but the most commonly used are inline Espagnolette and the cockspur handle. They operate an locking mechanism within the window with shootbolt rods that secure the window when it is closed. Depending on the type of handle, they are held in place using pins or screws.

You can find replacement handles for windows made of upvc on the internet and in many DIY stores. They are available in various finishes, and are suitable for new or replacement windows. For extra security they can be key-locking or non-locking in fire-escape.

To take off the handle just open the window to the door and remove all screws that hold it in place. Be careful not to cause damage to the screws and place them in a container to be stored for future use. Once the screws have been removed, carefully pull out the handle and measure from the base to the top of the spindle. This will provide you with the information needed to buy the correct replacement. The handle's spindle is the shaft made of metal that connects it to the lock gearbox within the window frame.

Take off the handle from the old one.

Changing a uPVC window handle is a straightforward job that usually takes less than five minutes with the proper tools. The first step is to determine the type of lock and handle, which will help you identify the right replacement. Then, you can take measurements of the spindle to make sure that the handle is suitable. The handle that was used previously needs to be removed and replaced with the new one.

Most uPVC handles come with inline Espagnolette handles. They have an internal spindle that slots into the locking mechanism on the window. These are generally easy to remove, but you may have to apply force when they're stuck. There are usually two screws that hold the handle in place, which can be removed with the help of pliers or a screwdriver. Depending on the type of handle, you might be required to take out any pins that are holding it in the position.

After the screws have been removed Once the screws are removed, you can remove the handle that was previously attached. The top of the base plate will be visible when the handle is in an open position, showing two screws that you can remove. If the sticker remains in place, you'll need to take it off.

Utilizing the screws from the handle, you are now able to screw the new handle into place. Align the screw holes on the window to the holes in the handle. Once you've completed this you can replace the screw caps. Test the new handle. The replacement of a uPVC window could be a quick and simple task, but you need to ensure you complete it in a proper manner.

Install the new handle

If you've been able to successfully remove the existing handle from the frame, it's time to put in your new one. Begin by finding the screws and then removing them out with your screwdriver. Once they are removed, put them in a safe location and move on to the next step.

Then, put the new spindle in the handle by lining it up with the hole in the handle and screwing it in. Make sure that the holes in the handle with those in the window frame. Use a screw of the same size as the one used previously.

uPVC Espag handles are equipped with a 7mm square spindle that turns the lock mechanism installed to the window. This type of handle is utilized in the majority of modern uPVC windows. uPVC Cockspur handles (also known as Cotswold handles) feature long noses that lock over the frame's outer edge or transom bar cross members and are commonly found in older windows made of uPVC.

It is essential to lock and replace Upvc window Handle unlock the window several times after the handle has been put in place. If everything goes according the plan, the new uPVC handle should be properly attached and running smoothly. If not, the steps listed above will allow you to identify any problems and resolve it quickly. If you are struggling with your uPVC handle or have any other issues with your home improvement using glazed, don't hesitate to contact us at Bridgewater Glass for professional assistance. Our glaziers have been trained to repair or replace window pane a variety of window handles and frames making us a good choice for your double-glazing requirements.

Test the new handle

Over time, uPVC handles become damaged and worn out. This can make them less secure and efficient which is why it's crucial to replace them as soon as you can. It's also a good idea to do this after you upgrade your windows, as changing the handle and lock will help maintain the integrity of your new windows.

There are many different styles of uPVC window handles. Some are secured to the frame with pins or screws, while others are fitted with blades that fit into the lock mechanism. Each lock type has its own method of replacing it, so you have to know which type you have.

Espag window handles are the most common type, and they're typically found on newer uPVC windows. They have a spindle that extends out from the handle and goes into the gearbox for locking and when you open the window it triggers the locking mechanism. They are also simple to take off. However, you must be careful not to harm either the mechanism or handle.

Cockspur window handles are another popular choice for uPVC windows. They're secured by a spur that hooks onto a wedge-shaped striker plate on the frame. When you close or tilt the window, it activates the locking mechanism. This kind of handle is more difficult to fix than other kinds however it's an excellent choice for the majority of homes.

Venetian handles are connected to the frame by two bolts and they have a low projection on the frame. This differs from the Espag handle. These handles are ideal when you want to have a flush handle that blends in with uPVC window frames. They're an excellent choice for residential and commercial properties.