Company Logo

• 목록
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are a great choice for modern homes. They are durable, long-lasting and Window Repair easy to maintain. They don't get rotten or rusty like timber and aluminum.

Regularly cleaning and lubricating UPVC windows and doors is vital. This will save you from costly repairs and increase energy efficiency.

1. Broken Glass

The damaged glass in your windows could cause severe damage to your home and may even be fatal. It is important to ensure that your windows are in good working order.

Single-pane windows are relatively easy to replace and will usually fit into the frames that were previously in use very easily. However, if windows with double panes are anchored by internal beading, it'll be more difficult to remove the panes that are in place and replace them with new ones. In this instance you'll need to source some plastic spacers that will aid the new pane in being able to fit perfectly into the frame of the window.

Wearing eye protection and thick gloves is essential when you are planning to remove the glass by yourself. It is also recommended to lay down a dropcloth before you begin working on the glass to ensure that any shards fall onto the fabric instead of landing on the floor where they can be trodden under and cause further damage.

After the glass has been removed, it's a good idea to seal the gap with some clear packaging tape or duct tape to prevent water and drafts from entering the property until a professional can come out and repair the window. This will also provide an obstacle to stop intruders from getting into your home. If the distance between the door and the window is significant, you may prefer security screens that includes an opening. This will give you the best of both.

2. Sagging

Upvc is a long-lasting and energy efficient alternative to timber sash windows. As time passes, they may develop a number of problems such as sagging. A window that is sagging can cause problems with light, draughts, and even security. If you notice that your uPVC window is beginning to lose its shape, it's crucial to act fast to prevent the problem from getting worse.

To fix a sagging window you can try to reposition the hinges. First, you'll need to unblock the windows to get at the frame. Then, you can remove the top and bottom hinges using a screwdriver, Window Repair and then adjust them clockwise or counter-clockwise. Once you've adjusted the hinges, close your window and verify the fit. If you're satisfied with the size of the window, you can tighten screws to keep them in the right position.

If you aren't able to move the hinges you may need to replace the seal. Over time, rubber seals lose their elasticity and dry out which causes their tightness to decrease. It is crucial to replace your seal as quickly as you can to ensure that your uPVC window watertight and draughtproof.

uPVC handles can also become loose. Most often, this is caused by screws that have become loose over time. However, it could be due to the fact that the handle mechanism has been worn out. It's relatively easy to fix a loose uPVC handle. The first step is to close the window and then perform an initial test to ensure that it fits. The joint at the corners of the sash should align with the joint on the casing. If it isn't, you can use a screwdriver or a wrench to loosen the handle and return the mechanism to its original position.

3. Water Leaks

If you're waking up to wet floors and mouldy walls each time it rains it's important to take action. Water leaks through windows can cause structural damage to your home and affect your ability to regulate the temperature of your home. Most often, uPVC window leaks are caused by a lack or damage to the sealant.

This is a simple fix that can be accomplished by any DIYer who is competent. Depending on the severity of the issue is, the old caulking may need to be removed. It is crucial to keep in mind that when it is about uPVC window repairs, you should avoid the temptation to "over-caulk in order to make the area more difficult to clean and can decrease the efficiency of your energy usage.

It is important to check that the drainage holes are free of debris and that the sill pan has been angled in a way that allows it to drain away from the window. In more serious cases, you may need to replace the window.

Other signs of long-term water leakage include rotted sills and the appearance of black spots of mold on the walls near the window. This fungus thrives under conditions of dampness and can spread quickly throughout the home.

It is also important to keep in mind that if the leak originates from the glass of your double glazed windows, it's more likely to be a problem with the glass seal, rather than the frame or sagging. This can be easily corrected by an uPVC window expert who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be at fault if your uPVC window is difficult to open, or if it opens with the breeze. They can be easily repaired by any skilled DIYer and can be completed in a matter of minutes.

Nearly every home in the UK will have either top hung or side-hung uPVC windows that are hinged and, like all mechanical parts, they are susceptible to wear and tear over time. It's very simple to change a window hinge but it's much easier if someone else helps you to hold the frame.

It is also important to verify that the uPVC hinges are opening and closed in the right direction. Look for the arrows on each hinge to determine which direction the window repair should be opened.

The issue can be caused either by opening the window incorrectly or by a poor installation in the factory. Sending us a picture via our website is often enough to resolve the problem. We are always happy to provide advice.

Regular lubrication of the hinges is also necessary. This can be accomplished by applying a light engineering oil to the hinges. We suggest using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regularly lubrication makes the window easier to open and close. It can also prevent corrosion and reduce the risk of sticking. Ideally, you should perform this every year. WD40 or other solvent-based oils should not be used as they could damage your uPVC windows.

5. Draughts

Draughts in Upvc windows can be caused by a variety of different things. First, the hinges because of wear and tear, may become displaced, which causes an opening to appear between the sash and the frame. These can be easily repaired by giving them a thorough clean, however when they're beyond repair, it may be necessary to get them realigned or replaced. The interlock may also become unbalanced. This happens on the hinge side and could require to be cleaned. In certain instances, it may be necessary to replace the hinges.

These seals are susceptible to wear and tear or get damaged over time, allowing air escape. Replacing these with high-quality weatherstripping is a good way to keep draughts at bay. Another option is to replace the window with low-emissivity glass. this will help to regulate indoor temperatures, and also reduce the risk of draughts.

The last way to reduce the amount of draughts is to use a Draught-excluder. These are usually fabric tubes filled with a filler which can be placed over your window sill. They can keep your home warm by blocking cold air.

The windows made of upvc can continue to provide excellent insulation and security to your home with regular maintenance and repairs. It is crucial to recognize that all windows have a lifespan and eventually, they will reach an point at which it is more economical to replace them than repair them. If you have any problems with your Upvc window you should consult a professional immediately.