Company Logo

• 목록
• 게시판 리스트 옵션
  • 수정
  • 삭제

Protect Your Pride And Joy With The Ghost Immobiliser

Guard your precious possessions against theft by using the Ghost Immobiliser. It is discreet and doesn't require additional key fobs.

The device uses existing buttons on your vehicle (steering wheel, door panels & centre console) to create a unique pin code sequence that can be up to 20 presses. This will allow your vehicle to start.

Simple change of PIN code

With the growing rate of vehicle theft, many owners are seeking to improve their security. There are a variety of security devices that are sold aftermarket, from tracking systems to immobilisers and alarms. However they do not all are equally effective in protecting your car. While a tracking device can help you find your vehicle in the event of theft, it does not prevent the crime from happening in the first place. Immobilisers, on the contrary, does exactly what it says on the tin: it shuts down the engine of your vehicle to prevent it from being started. The Autowatch ghost 2 immobiliser fitting near me immobiliser is one of the most advanced options available on the market, making it nearly impossible for thieves to take your car.

Using the existing buttons in your car The ghost device is able to create a unique sequence which must be entered before the engine can start. This can be done using the window, heater or ghost immobiliser indicator stalk buttons. There is also a mobile app that can be used as an emergency PIN override, allowing the driver to operate their car without the button sequence. This feature is particularly useful if you need to hand your car over for valet parking or servicing since the immobiliser will still be activated, but not disabled.

The Ghost is a very unique and ingenious device that works in conjunction with the buttons of your car instead of being a separate unit. It's not just an effective deterrent for vehicle theft however, it can be used to secure any future vehicles you may own. This makes it a far more cost-effective option than a traditional wheel lock.

Weatherproof small device

The Autowatch Ghost Immobiliser is a high-tech security system that protects your pride & joy from key cloning and hacking. It also blocks ECU swapping. It is a weatherproof tiny device that connects directly to your vehicle's ECU via the CAN data bus to shut down the engine. It can be placed in the vehicle without the need for additional wiring, and has been thoroughly tested to make sure it is compatible with all vehicles. It is also indestructible to jamming devices which is an approach used frequently by thieves to get around the immobilisers in place.

The advantage of CAN data over traditional systems is that they work silently. It isn't detected by sophisticated RF scanning or code-grabbing technologies and is also undetectable by conventional diagnostic tools. The Autowatch Ghost doesn't use LED indicators and instead uses buttons in your vehicle, like the steering wheel, centre console or door panels, to create an unique sequence of disarming. You can create a sequence that is up to 20 presses long to provide additional security. The iPhone app permits one, authorized connection, with a pairing code that is unique to the Ghost and communication between the two is encrypted.

The Ghost also stops car thieves from adding an additional key or replacing the ECU to bypass the immobiliser to start the engine. The engine will only run if a valid PIN code is entered. It can also be put into valet/service mode for a temporary operation (with defined parameters like a 30mph speed limit) so that you can hand your car over to a valet service for servicing without the need to enter a pin code.

Each vehicle is tested

The Autowatch ghost immobiliser fitting near me is the first aftermarket CANbus immobiliser. It can be connected to the vehicle's wiring and to the engine control unit (ECU). The device detects signals to prevent your car from operating normally until you enter a custom code. The system can be turned on and off through your smartphone's app without the need for additional wires.

The standard factory immobilisers function by using a transponder that is integrated into the key. This transmits a signal to the ECU. The car will start if the correct code is transmitted. However, if a transponder from another vehicle is used instead, the immobiliser doesn't recognize it. This makes it possible for the vehicle to be started and stolen. A South African company that is at the forefront of vehicle safety systems technology has developed the Ghost immobiliser. It safeguards your car from key cloning, hacking and even key theft. The only way that a burglar could steal your vehicle is physically towing it away and even then, they would not be allowed to drive it.

Ghost uses the buttons in your car, such as the indicator stalk along with the steering wheel, indicator stalk and door panels to generate an unique, changeable PIN code sequence that needs to be entered before you are able to use your car. It does this without extra hardware, such as keys fobs. It can take up 20 to 20 presses. It is also undetectable by diagnostic equipment and does transmit radio frequency signals, meaning thieves are not able to use sophisticated RF scanners or code-grabbing technologies to identify that the system has been set up.

Unlike physical anti-theft devices like wheel locks or clamps, Ghost is hidden within the vehicle, so it cannot be taken away or disabled by thieves and is even more difficult to get rid of from a car alarm which requires disarming using the use of a button sequence. This makes it a fantastic alternative to an GPS tracking device that can be used to track your vehicle after it's been taken.

Override of emergency PIN code

You don't need to go far on social media to see stories or even videos of vehicles that were stolen by car thieves employing the most advanced technology tools available to them. This includes key-cloning devices and hacking devices that allow them to start your vehicle without the original keys.

The Ghost immobiliser was specifically designed to prevent this and offer an additional layer of security to protect your vehicle from being targeted by thieves. It is created by creating an unique pin code sequence that is triggered by your buttons on the steering wheel, door panel, and the centre console. This unique PIN is entered alongside your original key fob to prevent the engine from beginning. The unique override pin is on the black card you will receive following installation and is easy to remember because there are no LED indicators.

The device is hidden in the wiring of the vehicle and does not emit radio signals. This means it can't be detected by diagnostic software that can determine the security system you have installed. This makes it an excellent alternative to a tracking device.

Unlike most other security systems, which have a relay in the engine bay these CANBUS Immobilisers communicate with the car's ECU and BCM via the CAN data bus (brand dependent). This allows them to block the vehicle completely by sending an electronic block to the ECU and engine.

It is also possible to connect an analog immobiliser, alarm or tracker to these systems but this must be specified prior to installing the device. They are also service/valet mode compatible and a great alternative to a tracker you are taking your car in for repairs to an electrical issue at the dealer.

Service/Valet mode

In recent years, there has seen an increase in the number of cars being stolen from owners without keys. It is easier than ever to take your joy and pride due to the availability of key cloning tools and door lock picks. To prevent this from happening, we now offer the Autowatch Ghost immobiliser that prevents your car from being driven despite the fact that your keys have been copied or your car was stolen.

It directly communicates with your car's ECU (Engine Control Unit) via the CAN data loop. It's completely silent since it doesn't use radio frequencies or key fobs. It can't be detected by diagnostics or any other hacking device. It also stops you from introducing an ECU or key to circumvent the system, as only the PIN code allows the engine to be started.

The device is hidden within your car and is reached via the buttons on your steering wheel, centre console, and door panels. Before you can start your vehicle, you must enter a unique and reversible PIN code that can be as long as 20 numbers.

This is the first aftermarket immobiliser CAN bus that has been developed that can prevent your car being moved away or even started in the event that a PIN code hasn't been entered prior to. If you are driving away with the device in motion the indicator will flash on your dashboard which will flash continuously for around 300m. Entering your PIN code will deactivate the anti-hijack. Your vehicle will continue to operate just as normal. If you don't enter your PIN code at this point, the indicator will continue to flash and will require another PIN code for every attempt to start your car.