Company Logo

• 목록
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are a fantastic choice for modern homes. They are durable, long-lasting and easy to maintain. Unlike timber and aluminium, they don't corrosion or rot.

It is crucial to wash and oil UPVC doors and windows on a regular basis. This will save you from costly repairs and improve the efficiency of energy.

1. Broken Glass

The broken glass in your windows could cause serious damage to your home and may even be fatal. It is important to ensure that your windows are in good working order.

For single pane windows it is relatively easy to replace them, and the new window will generally fit within the frame of the previous one easily. However If windows with double panes are held in place by internal beading, it'll be more difficult to remove the panes that are in place and replace them with new ones. In this case, it is necessary to purchase plastic spacers in order to make sure that the new pane fits into the window frame.

Wearing eye protection and thick gloves is a must if you plan to remove the glass by yourself. It is also a good idea to lay down a drop cloth before you start working on the glass, so that any shards will fall onto the cloth instead of landing on the floor, where they could be trampled upon and cause further damage.

After the glass has been removed from the window, it's best to cover the gap with packaging tape or duct tape to stop water and drafts from getting into the property until a professional is able to come out and repair the window. It also acts as a barrier that will prevent any intruders from getting access into your home. If the distance between the window and the door is significant, you may prefer security screens that includes an opening. This will provide the best of both.

2. Sagging

Upvc windows and doors are a low-cost energy-efficient, durable and long-lasting alternative to timber windows made of sash. In time, they could develop a number of problems such as sagging. A sagging window in uPVC could cause issues with light, draughts and even security. If you notice that your uPVC window repair near me is beginning to sag it's crucial to act fast to prevent the problem from getting worse.

Repositioning the hinges can aid in fixing a window which is sliding. To do this, you'll need open the window so that you can access the frame. You can then unscrew both the hinges on the top and bottom with a screwdriver and adjust them counter-clockwise or clockwise. Once you've repositioned the hinges, close the window and test it for fitting. If you are happy with the size of the window, tighten the screws to hold them in the right position.

If you can't reposition the hinges, you might require replacing the seal. Over time, rubber seals lose their elasticity and become dry, which causes them to loosen. If this happens, it's crucial to replace the seal as quickly as possible so that your uPVC windows are watertight and draught-proof.

uPVC handles could also become loose. This is usually due to screws that have become undone over time, but it could also be due to the handle mechanism getting worn out. It's relatively easy to repair a loose uPVC handle. First, you'll need to shut the window and do a test fitting. The corner joints of the sash need to align with the casing joint. If it doesn't, you can use a screwdriver to loosen the handle and Window Repairs Near Me return the mechanism to its original the position it was in.

3. Water Leaks

If you wake up to wet floors and damp walls every time it rains it's important to take action. Windows that leak water do can not only cause degradation of your home's structure but also hinder your efforts to regulate the temperature inside your home. Most of the time, uPVC window leaks are caused by damaged or missing sealant.

This is a simple fix that can be done by any DIYer who is competent. Depending on the severity of the issue the caulking that was used up may require removal before a fresh layer is applied. When it comes to uPVC repair, it is important to avoid over-caulking. This will make your window more difficult to clean and lower its energy efficiency.

Make sure that the drainage holes do not have debris in them and that the sill pan is properly angled to drain away from the window. In more serious cases you might have to consider replacing the window.

Moldy sills and rotten ones are also signs of water leakage. This is a fungus that thrives in damp conditions and is able to quickly spread throughout the house.

If the leakage occurs between the double-glazed window repairs near me - click the following webpage,, it is more likely the problem is with the seal than the frame. It is also possible to be repaired by an uPVC window expert who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or are loose and open with ease It could be the hinges that are at fault. They can be repaired by any DIYer who is skilled and can be completed in a matter of minutes.

Like any mechanical component hinges are prone to wear out over time. It's very simple to change the hinges on a window however it is easier if someone else helps hold the frame.

Check that the uPVC hinges are closed and open in the proper direction. You can check this by checking for the arrows on each hinge, this shows which way the window should be opened.

Faulty window hinges could be the result of incorrectly opening the window in a particular manner or because of poor installation at the factory. This can often be resolved by sending us a photograph via our website and we will be happy to give you advice.

It is also important to grease the hinges on a regular basis. This can be accomplished by applying an oil that is light in nature to the hinges. We suggest using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regular lubrication can help the window to open and close more easily. It also decreases the chance of windows getting stuck and stop corrosion. This is recommended to be done at least every year. WD40 and other solvent-based lubricants are not recommended as they could damage parts of your uPVC window.

5. Draughts

Draughts in Upvc windows can be caused by a few different factors. Firstly the hinges, again because of wear and tear, may become displaced, which will cause a gap to form where the sash joins the frame. They can be repaired by giving them a good cleaning, but in the event that they are beyond repair it may be necessary to get them realigned or replaced. Secondly the interlock, this is located on the hinge of the window, can also become misaligned, again it may be possible to just give them a thorough clean, however in some cases it might be necessary to have them replaced.

The next common cause of draughts is the window seals. These are susceptible to being worn out or damaged over time, and let air escape through the gaps. Installing high-quality weatherstripping will help to keep draughts at bay. Another option is to replace the upvc window with low-emissivity glass. this will help in regulating indoor temperatures and again will reduce the possibility of draughts.

The last way to reduce draughts effectively is by using a Draught-exclusion device. These are usually fabric tubes filled with a filler which can be put on top of your window sill. They can keep your home warm by blocking out cold air.

The windows made of upvc can continue to provide excellent insulation and security in your home with a little regular maintenance and repairs. It is important to remember that all windows eventually get worn out and it is more cost-effective to replace them rather than repair them. So, if you are having issues with your upvc windows, it is recommended to seek help from a professional immediately.