Company Logo

• 목록
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are a fantastic choice for modern homes. They are long-lasting, durable and easy to maintain. As opposed to aluminium and timber they don't get rusty or decay.

It is essential to clean and oil UPVC doors and windows on a regular basis. This will help avoid unnecessary repair costs and increase energy efficiency.

1. Broken Glass

If the glass in your window is damaged, it could cause a large deal of damage to your home, making it extremely dangerous and possibly fatal. It is crucial to take the time to make sure that you're doing all you can to keep your windows in good condition.

For single pane windows, it is fairly easy to replace windows, and the new one will generally fit within the frame of the previous one easily. If you have double-paned windows which are joined by internal beading, it is harder to remove and replace the panes that were previously in use. In this instance it is essential to purchase plastic spacers in order to make sure that the new pane fits into the window frame.

If you're planning to attempt to remove the glass panes yourself it is important to wear the proper safety gear, including thick gloves and protective eyewear. It is also a good idea to lay down a drop cloth prior to when you begin working on the glass, so that any shards fall onto the fabric instead of onto the floor where they could be trampled on and cause further damage.

Once the glass has been removed from the window, it's best to cover the gap with packaging tape or duct tape to stop water and drafts from entering the property until a professional comes out and repair the window. It also acts as a barrier to prevent any intruders from making their way into your home. If the gap is large, you might be interested in the security door with an integrated window, as it will provide the best of both worlds.

2. Sagging

uPVC is a durable energy-efficient, cost-effective and economical alternative to timber sash window. In time, they could be affected by a variety of issues, including sagging. A sagging uPVC windows can cause problems with light, draughts, and even security. If you notice that your uPVC window is beginning to sag it's important to act quickly to prevent the problem from getting worse.

Repositioning the hinges can aid in fixing a window that is sagging. To do this, you'll have to open the window repair so that you can access the frame. After that, using a screwdriver, you can take off the top and bottom hinges and adjust them by turning them clockwise or anti-clockwise. Close your window to test the fit after having moved your hinges. If you are happy with the fit of your window, you can tighten screws to secure them in the right position.

If you can't reposition the hinges, you might need to replace the seal. Rubber seals can dry out and lose their elasticity with time, leading them to loose their elasticity. If this happens, it's essential to replace the seal as fast as you can to ensure that your uPVC windows are waterproof and secure from draughts.

upvc window repair near me handles can also become loose. This is often caused by screws that have been removed over time, but it could also be caused by the handle mechanism wearing out. It's a good thing that it's simple to repair the loose uPVC window handle yourself. First, you'll need close your window and UPVC Window Repairs do an experiment fit. The corner joints of the sash need to align with the casing joint. If it doesn't then you can make use of a screwdriver to loosen the handle and then turn the mechanism back into position.

3. Water Leaks

If you wake up to wet floors and mouldy walls each time it rains it's crucial to take action. The leaks of water from windows do not only lead to the destruction of your home's structure but also undermine your efforts to control the temperature inside your home. The most common cause for leaks in uPVC windows is that the sealant around the frame has been damaged or is missing.

This is an easy fix that can be done by any DIYer who has the ability. Depending on the severity of the problem the caulking used previously may require removal before a fresh layer can be applied. It is important to keep in mind that when it comes to uPVC window repairs, you should not be tempted to apply too much caulk and then make the area harder to clean and can reduce your energy efficiency.

Make sure that the drainage holes are free of debris inside them and that the sill pan is angled correctly to drain away from the window. In more severe situations, you may have to replace the window.

Other signs of long-term water leakage are rotted sills and the appearance of black spots of mold on the wall near the window. The fungus thrives in humid conditions and can propagate quickly throughout the home.

If the leakage is occurring between the double-glazed window, it is more likely the issue is with the seal rather than the frame. A uPVC specialist can easily fix this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

Hinges may be to blame for the reason that your uPVC window is difficult to open or if it opens in the breeze. They can be replaced by any competent DIYer and can usually be completed in a matter of minutes.

Nearly every home in the UK will have top-hung or side hung uPVC windows that have hinges and like any mechanical part they will wear out over time. It's very simple to replace a hinge on a window but it's much easier if someone else helps hold the frame.

Check that the uPVC hinges open and close in the correct direction. This can be done by checking for the arrows on each hinge, this shows which way the window should open.

Window hinges that aren't working properly could be the result of incorrectly opening the window in a certain manner or because of inadequate installation at the factory. Sending us a picture via our website is often enough to solve the issue. We are happy to offer suggestions.

Regularly lubricating the hinges is also necessary. This can be done by applying a light engineering oil on the hinges. We recommend using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regular lubrication will make the window easier to open and close. It also helps prevent corrosion and reduce the possibility of sticking. The ideal time to perform this every year. WD40 and other solvent-based lubricants should not be used as they could damage your uPVC windows.

5. Draughts

Draughts in Upvc windows can be caused by different factors. The hinges, also due to wear and tear can become misaligned, this causes an opening to appear where the sash joins the frame. If they're beyond repair, it might be necessary to get them re-aligned. The second is the interlock, which is located on the hinge side of the window, may be misaligned. Again, it's possible to give them a thorough clean, however in some cases it might be necessary to get them replaced.

The next common cause of draughts is the window seals. These are prone to wear or damaged over time, and will allow air to escape through these gaps. Replacing these with high-quality weatherstripping can help stop draughts. Replace the windows made of Upvc with low-emissivity lenses. This will help regulate indoor temperatures, and reduce the possibility of draughts.

The final method to cut down on draughts effectively is by using a Draught-exclusion device. These are usually fabric tubes filled with a filler that can be hung over your window sill. They will help stop cold air from entering and keep your home warm and cosy!

With a little regular maintenance and repair, your upvc windows will continue to provide an excellent level of security and insulation for your home. It is crucial to realize that windows last for a certain period of time and eventually, they will reach a point where it is more cost-effective to replace them rather than repair them. If you are experiencing problems with your upvc windows, it's recommended to seek help from a professional as soon as you can.