Company Logo

• 목록
• 게시판 리스트 옵션
  • 수정
  • 삭제

UPVC Window Handle Replacement

It is easy to replace a broken window handle with the proper tools. It is essential to identify the kind of handle you have and the spindle's size before purchasing the replacement.

Older uPVC windows feature handles with cockspurs, which have an extension spur that can the lock of a wedge cockspur striker plate. They can be right-handed or left-handed and must be compatible when replaced.

What kind of lock and handle do I need?

There are a variety of window handles made from upvc and locks, each having their own benefits and purposes. The type of handle you have will determine the ease to open your windows and if the locking mechanism functions as intended. With time and regular use, upvc window handles are prone to wear or damage. out, rendering them less secure and efficient. In some cases, they may even disappear completely. It is essential to fix your window handles made of upvc immediately if you see they are falling off. This will help avoid burglaries and ensure your home is secure.

It's a task that almost anyone can do. With just a few tools and the right knowledge it's a simple procedure that shouldn't take more than a couple minutes. You must know the kind of lock or handle you have on your window. This will allow you to choose the appropriate replacement.

Inline Espagnolette Handles

They are typically located on the sides of the window. They are flat in design and have an opening that is connected to the locking mechanism on the frame of the window when it is turned. Inline upvc handles have spindles that run through the middle of the handle, and UPVC Window Handle Replacement into the frame of the window to activate the latch.

Cockspur Handles

These handles are usually found on older uPVC window frames. They have distinct hook-shaped designs. Cockspur handles are fitted with a single screw that secures the handle to the frame and aren't as secure as other kinds of window handles.

Handles that can tilt and turn

The tilt and turn handles are different from other upvc handles in that they can be rotated for UPVC Window Handle Replacement opening the window, and then lowered into the window to ventilate. They feature a 7mm spindle at the back and are available both in left and right-handed versions.

When purchasing replacement handles made of upvc It is crucial to check the spindle length as not all are identical in size. Drop something into the middle of the hole to test the length. This is the maximum spindle length that will fit your window.

What is spindles?

uPVC window handles function similarly as doors. By turning the handle, you are able to open a latch in the frame. The window can then be opened and shut. These handles can be damaged, especially if frequently used or subjected to harsh conditions. This can leave you needing to replace your uPVC handles on windows since they might not be able to operate the window correctly in the future.

There are many different kinds of uPVC handles to choose from, comprising Espag, Cockspur and Spaded handles. These handles are designed to fit into the uPVC frames in a variety of ways and each handle type uses a specific spindle to lock the mechanism fitted into the window. It is crucial to know the type of handle you have installed on your uPVC windows so that you can replace it with the right one.

You can find out what kind of uPVC handle you are using by inspecting the base of the handle. There should be a "snap-in cover' over one screw that holds the handle's base in the correct position. Once you remove this, you will be able see the second screw that holds the handle base in position. After both screws are removed then you should be able to pull the handle from the uPVC.

After taking off the uPVC handle, remove it from the locking mechanism. Note the length of the spindle. You'll need to purchase a replacement with the same length as the handle that was originally used and the locking device.

The spindle wears out and cannot operate the locking mechanism. This can be due to wear and tear from continuous use, a loosening of the locking mechanism or even rust over time. If this happens, you'll have to replace both the window handle and the locking mechanism in order to restore the full functionality of your uPVC Windows.

How do I take off my old handle?

Window handles can be damaged or destroyed over time. It is essential to repair them as quickly as you can to ensure your safety. Fortunately, replacing a worn or damaged handle is a relatively simple job that can be accomplished in less than an hour and doesn't require any special tools.

To remove the old handle, first remove the screw at the bottom of the handle. Once the screw is removed, the handle will be removed. There is a second screw that is located at the bottom of the handle's base, and it is able to be removed as well. After these two screws have been removed, the handle can be detached from the base of the window.

Once the old handle has been removed, you can take the new handle and line up the fixing holes with the holes currently in the window frame. There may be a tiny cap or sticker on the new handle, so remove the caps if needed, and then screw the handle into the frame. It is essential to ensure whether the handle functions after it is installed. Turn the handle and ensure that the lock mechanism is activated.

Espag handles have a spindle that protrudes from the handle and slots into a multipoint locking mechanism inside the frame of the window replacement panes. Cadenza windows come with a blade with cut-outs that slot into the lock mechanism, while Cockspur handles have a long nose that hooks over either the frame's outer or the transom bar cross member within the window.

Once you have the new handle in place, you can insert the spindle inside the lock in the window and then tighten it down. Replace the snap-in cover and screw cap (if applicable) after the handle has been firmly fixed. When the handle is ready for use, simply open and close the window a few times to make sure that it functions correctly and securely.

How do I install the new handle?

Changing your uPVC window handle isn't difficult, and the process is simple. You'll need an screwdriver and a bit of patience. The first thing to do is make sure that the handle you have previously used is in the unlocked position and then remove any screws that are visible, you can also replace them by screw caps if you need. After removing the handle you'll need to take note of the length of the spindle that extends from the back. This is important as it will determine the type of handle that you will require to purchase.

Espagnolette handles are the most popular type of handle used on uPVC windows. They feature a spindle that is inserted into the handle, and is responsible for a locking mechanism inside the frame of the window. When the handle is turned it opens the latch on the window and allows it to open. In regular use and over time, handles for espagnolette may become damaged.

Cadenza handles are another type of uPVC window pane replacement handle, which is typically used on tilt and turn windows. They feature an elongated blade that functions as an interlocking mechanism that is multipoint within the window. They are usually more secure than espagnolette handles since they are only accessible from the inside. You can replace them using the same method that you would with espagnolette handles however, make sure that the new handle is angled, not flat.

Once you have determined the correct handle to purchase You can simply place the new handle with the screw holes and then screw it into place. Then, you should put the screws on and test the new handle. This is done by moving the handle from locked position to the unlocked and the reverse direction several times. It may be worth contacting an expert to see how you can fix any issues. They can advise you on how to resolve the issue in a quick and effective manner.