Company Logo

• 목록
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is a fantastic option for modern homes. They are easy to maintain, durable and long-lasting. As opposed to aluminium and timber they don't rust or rot.

It is essential to clean and oil UPVC windows and doors on a regular basis. This will reduce repair costs as well as improve the efficiency of energy.

1. Broken Glass

The damaged glass in your windows can cause severe damage to your home and even be fatal. It is essential to make sure that your windows are in good shape.

For single pane windows it is relatively easy to replace them, and the new window will usually fit inside the old frame very easily. However If you have double-pane windows that are anchored by internal beading it will be more difficult to take out the panes that are in place and replace them with new ones. In this instance it is essential to purchase plastic spacers in order to make sure that the new pane fits into the window frame.

If you're planning attempt to remove the window panes yourself, it is essential to wear the proper safety gear, including thick gloves and protective eyewear. It is also recommended to lay down a dropcloth prior to you begin working on the window panes to ensure that any shards fall on the fabric and not on the floor and could be trampled under.

It's a great idea to cover the gap with tape after the glass is removed. This will keep drafts and water from entering your home until a professional comes out to fix the window. This also serves as an obstruction to prevent intruders from getting into your home. If the gap is large, you might think about a security door that has an integrated window, since this will offer the best of both worlds.

2. Sagging

Upvc is a long-lasting, energy-efficient and affordable alternative to timber sash windows. However, over time they can suffer from a variety of problems including sliding. A sagging window can cause problems with light, draughts and even security. It's important to take action when you realize that your uPVC windows are sagging.

To fix a window that is sagging you can try to reposition the hinges. First, you'll need to unblock the windows so you can reach the frame. After that, using a screwdriver, you can remove the top and bottom hinges and adjust them by turning them clockwise or counter-clockwise. Once you've repositioned the hinges, shut your window and verify the fit. If you're happy with the fit, tighten the screws to ensure that they remain in position.

If you are unable to reposition the hinges, you might need to replace the seal. Over time, rubber seals lose their elasticity and become dry and cause their tightness to decrease. It is important to replace your seal as soon as you can in order to keep your uPVC window waterproof and draughtproof.

uPVC handles could also become loose. This is usually due to screws that have loosened over time, but it can be caused by the handle mechanism getting worn out. Fortunately, it's easy to fix a loose uPVC window handle yourself. You'll first need to close the window and perform an initial fitting. The corner joints of the sash must be aligned with the casing joint. If it isn't then you can use the screwdriver to loosen up the handle. Then, turn the mechanism back into place.

3. Water Leaks

If you awake to wet floors and damp walls each time it rains, it's important to take action. Water leaks through windows can cause structural damage to your home, and hinder your ability to control the temperature of your home. Most often, uPVC window leaks are caused by a damaged or missing sealant.

This is a simple fix that can be completed by any DIYer who is competent. Based on the severity of the issue the caulking used previously may require removal before a new layer of caulk can be applied. It is essential to keep in mind that when it comes to uPVC window repairs, you should not be tempted to apply too much caulk' as this will only make the area harder to clean and decrease the efficiency of your energy usage.

It is essential to ensure that any drainage holes are clear of debris and that the sill pan has been angled in a way that allows it to drain away from the window. In more serious situations, you may have to replace the window.

Moldy sills and rotten ones are also signs of water leakage. The fungus thrives in humid conditions and can propagate quickly throughout the house.

If the leakage is occurring between the double-glazed window, it is more likely the issue is related to the seal, not the frame. Again this can easily be fixed by an uPVC window expert who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or are loose and blow open with ease It could be hinges at the fault. Anyone who is a skilled DIYer can fix these in a matter of minutes.

Nearly every home in the UK will have top-hung or side hung Upvc Window repair windows that are hinged and, like all mechanical parts, they will wear out over time. It's easy to change a window hinge, but it's simpler if you have someone to help hold the frame.

It is also worth checking that the uPVC hinges are being opened and closed in the right direction. Check for the arrows on each hinge to determine the direction in which the window should be opened.

The problem can be caused either by opening the window incorrectly or by a poor installation at the factory. It is usually possible to fix the issue by sending us a picture via our website and we will be happy to give you advice.

It is also crucial to ensure that the hinges are lubricated on a regular basis. Applying a light engineering lubricant to the hinges is a great method of doing this. We recommend using a lubricant that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can make the window easier to open and close. It can also stop corrosion and reduce the risk of sticking. It is recommended to perform this every year. WD40 and other solvent based lubricants are not recommended as they will damage parts of your uPVC window.

5. Draughts

Draughts can be caused by different causes. Firstly the hinges, again due to wear and tear could become misaligned. This will cause a gap to form between the sash and the frame. These can be easily repaired by giving them thorough clean, however in the event that they are beyond repair it might be necessary to have them aligned or replaced. The second is the interlock, which is located on the hinge of the window, can also be misaligned, and again it may be feasible to give them a thorough clean, however in some instances it could be necessary to have them replaced.

These seals can wear down or get damaged over time, allowing air escape. Replacement of these with high-quality weatherstripping is a good way to prevent draughts. Another alternative is to replace the window with low-emissivity glass, this will help in regulating indoor temperatures, and also reduce the risk of draughts.

The final method to cut down on drafts effectively is to use a Draught-excluder. These are usually fabric tubes filled with a filler which can be hung over your window sill. These will help to keep cold air out and keep your home warm and cozy!

With a little maintenance and repairs windows made of upvc will continue to provide an excellent level of insulation and security for your home. It is important to remember that all windows will eventually get worn out and it could be more cost-effective to replace them than to repair them. If you are experiencing issues with your window made of upvc, it's best to consult an expert as soon as possible.