Company Logo

• 목록
• 게시판 리스트 옵션
  • 수정
  • 삭제

Window Repairs

Window repairs can save homeowners money and keep their homes comfortable. In the event of serious damage, such as broken glass or a damaged frame, a window replacement could be required.

However, many other issues can be fixed to prolong the life of your windows. Common problems include:

Cracked or Broken Panes

Cracked windows could be caused by a lawnmowers that throws rocks in the wrong direction or branches of trees being blown by strong winds. This is not only visually awful, but it could also lead to higher energy bills as the broken pieces let cold air into your house. It's relatively easy to repair windows with damaged panes.

Begin by carefully removing glass using gloves and sunglasses. You may need use a utility knife to loosen old glazing compound or putty around the frame's edges. Then, clean the glass's surface and the frame's wood using a soft cloth or paper towel.

After the area is cleaned, apply a waterproof silicone caulking on the frame's perimeter. This helps prevent water from getting in through the crack, which could cause further damage to both the frame and the glass.

If you have double-paned glass, cracks that are not treated properly could weaken the gas layer between the panes and make your windows less efficient in insulating. If the crack is serious enough to cause damage to the quality of the glass or if you have an inner pane completely missing, it might be time to call in an expert.

Cracks caused by thermal stress can occur when there is a drastic difference in temperature both inside and outside your home. This causes the glass to expand and contract. If the cracks are on two sides of a glass, it is recommended to replace it instead of try to repair it.

Clear tape can be used to fill cracks in windows that are not yet ready to be replaced. It will also keep out bugs and cold wind. You can also cut an area of nylon stocking or tarp that's sufficient to cover the crack and glue it in place with duct tape. This is not an end-to-end solution, but it's a good way to keep insects and cold air away from your home. If you notice cracks on the windows of your old ones, you should check with your local company to see whether replacing the entire window is the best option.

Rotten Wood

Wood rot is one of the most frequent issues with windows. It can damage a home's appearance and create a security hazard. It is, however, possible to repair wood that has rot. You will first need to address the cause of the wood rot. Check for roof leaks and other places where water could get into the wood.

Next, you will need to remove any rotten areas of the window frame. This can be done using the claw hammer, chisel or a rasp. After the areas that are rotten have been eliminated, you will need to replace them with fresh wood. It is recommended to use pre-treated wood for this project since it will be resistant to rot. If you are not able to replace the rotted timber you can apply wood hardener and filler to strengthen the damaged area. The majority of hardware stores sell this kind of product. Follow the instructions on the label of the product to achieve the most effective results.

After you have repaired the rotten areas of the windowsill, it is essential to protect the newly-repaired area. Apply a water-resistant sealant to the wood. Sikkens for instance is a great one to use.

You can also apply an epoxy filler that is two-part to protect the wood from further damage. It is easy to apply and provides a good finish. However, it is important to adhere to the instructions for application on the label. After the epoxy filler dries, you can sand down the wood's surface. Start with a rough sandpaper, then move on to more smoother grades.

You do not want to expose the rotted part to more moisture. Therefore, it is recommended to cover the repaired area with an oil-based primer which will protect it from moisture. After that, you are able to reapply the wood sealant that is waterproof.

The W won't let you open

A upvc window repair near me that won't open can be caused by a variety of factors. The house may have settled or the wooden frames could have warped during wet weather. Somebody may have put them in place to protect themselves. However, with a little patience and the right tools, many windows that are locked can be opened.

Accumulated debris or gunk can be a major reason of the window not opening. Acme Glass notes that dirt and grime builds up over time on hinges, sliding tracks, and locks. In addition, metal hardware is prone to rust when it comes into contact with humidity or direct sunlight. Making sure these areas are lubricated with spray grease can prevent oxidation and keep your window operating correctly.

Stuck windows may be caused by a loosening or breakage of the pulleys that are used to lift and lower the window. These components can lose their tension and become obstructed especially if the window is located two or more stories higher than the ground.

If you're having trouble opening the window, try using a pry bar to gently force the window to open a bit at each time. Put a block on the frame of the window to give the pry bar more leverage. Be careful not to harm the wood or the Window repair. Alternately, you can run a hair dryer around the edges of the frame for several minutes to warm the wood and allow it to move more easily.

Another common problem with windows that won't open is a defective spring that keeps the window jamb from lowering or rising. Depending on the manufacturer of the windows, you'll need to refer to the manual of your owner for additional instructions.

If you've tried cleaning and lubricating the moving parts of your windows, but they still won’t open, then it's time to replace the windows. Homespire Windows & Doors offers energy-efficient replacement windows. Don't let the windows of your home go from functional to inoperable. If a window isn't properly shut can make your home vulnerable to burglary and water damages. Contact our team for more information on our windows replacement and services today!