Company Logo

• 목록
• 게시판 리스트 옵션
  • 수정
  • 삭제

UPVC Window Handle Replacement

It's simple to repair a damaged window handle with the right tools. However, it is essential to know your handle's type and spindle's length prior buying a glass replacement on windows.

Older uPVC windows use handles with cockspurs, which have an extension spur that can lock over a cockspur wedge striker plate. These can be either right or left-handed and have to be matched when replacing.

What kind of lock or handle do you have? I have

There are many upvc window locks and handles each with their particular advantages and uses. The type of handle that you choose will determine whether or not the locking mechanism you have is effective and if it's easy to open the windows. As time passes and with regular use, upvc window handles may become damaged or worn out, rendering them less secure and efficient. In some cases they might even be completely removed. It is essential to fix your upvc window handles as soon as you notice they are falling off. This will prevent possible break-ins and will keep your home safe.

It's a simple job that virtually anyone can perform. You'll need a few basic tools, but with the right knowledge, it is simple and should take only a couple of minutes. To get started, you will need to determine the kind of lock and handle you have on your window made of upvc, which will help you identify the best replacement glass for window near me.

Inline Espagnolette Handles

These are the most commonly used type of upvc handles and are usually placed on the side of your window. They are flat in design and come with a latch that engages with the locking mechanism on the frame of the window when it is turned. Inline upvc handles also have spindles that run through the centre of the handle and into the frame of the window to operate the latch.

Cockspur Handles

These handles are usually found on older uPVC window frames and have a distinctive, hook-shaped design. Cockspur handles are fitted with a single screw that is used to secure the handle to the frame and aren't as secure as other kinds of window handles.

Handles that can tilt and turn

The tilt and turn handles are different from other upvc handles because they can be turned to open the window and then lowered into the window to allow air circulation. They feature a 7mm spindle at the back and are available both in right-hand and left-hand versions.

When buying replacement upvc handles it is essential to verify the length of the spindle because not all handles are the same size. Drop something in the middle of the hole to measure the length. This is the length of the spindle that will fit in your window.

What is the spindle?

uPVC window handles work in a similar way like doors, turning the handle to open an opening inside the frame. The window can then be opened and closed. But, at times, these handles can become damaged, especially when they are frequently used or exposed to extreme weather conditions. This can lead to the need to replace your uPVC windows handles as they may not be able to operate the window in a proper manner in the future.

There are many different kinds of uPVC handles that are available, including Espag, Cockspur and Spaded handles. These handles are made in a variety of ways to fit into uPVC frames. Each handle type uses a different spindle to lock the window mechanism. It is crucial to know the kind of handle that is installed on your uPVC windows so that you can replace it with the correct one.

The base of the handle will tell you what kind of uPVC it is. A snap-in cover is over the screw that holds the handle's base in position. After removing this and you'll be able to see the screw that holds the base of the handle in place. After both screws are removed, you should be able take the handle out of the uPVC.

After you have removed the uPVC window handle, you will need to remove the spindle that was previously attached to the locking mechanism. Take note of the length of the spindle. You'll need to purchase a replacement with the same length as the original handle and the locking device.

The most common issue with window handle problems with uPVC is that the spindle gets worn-out and is unable to longer work with the locking mechanism. This can be caused by corrosion, damage from frequent use, or the locking mechanism becoming looser. When this happens it will be necessary to replace the window handle and the locking mechanism to restore complete functionality to your uPVC windows.

How do I get rid of my old handle?

Window handles are susceptible to being damaged or broken over time. It is important to fix them as quickly as you can to ensure your safety. It is easy to replace a damaged or worn handle. The task can be accomplished in less than a minute without the need for special tools.

To remove the old handle, first remove the screw located at the bottom of the handle. After the screw is removed, the handle will be pulled away. There will be a second screw that is located at the bottom of the handle's base, and it can be removed as well. After both screws are removed, the handle can be removed from the base of the window.

After the handle has been removed, you can take the new handle and align the fixing holes with the holes that are currently in the window frame. There may be a little cap or sticker on the new handle, so take off the caps if needed, and then screw the handle in its place. Once the handle is in place it is important to test that it is working by turning the handle, and ensuring that the lock mechanism is activated.

Espag handles have a spindle which protrudes from the handle and slot into the multipoint locking mechanism on the frame of the window. Cadenza windows feature blades with cut-outs that slot into the lock mechanism while Cockspur handles have a long nose that hooks over either the frame's outer or transom bar cross-member within the window.

After you have installed the new handle, insert the spindle into the window lock and tighten it. Replace the snap-in cover and screw cap (if necessary) once the handle has been firmly fixed. When the handle is ready for use, simply open and close the window a couple of times to ensure it works properly and securely.

How do I install the new handle?

Changing your uPVC window handle isn't a big deal and the process is simple. You'll need a screwdriver, and a bit of perseverance. First, make sure the handle that you are replacing is unlocked. Then, remove any screws that are visible. You can also replace them with screw caps. After removing the handle you'll need to take note of the length of the spindle that extends from the back. This is important as it will determine the kind of handle that you will require to purchase.

Espagnolette handles are the most common type of handle for uPVC windows. The spindle is inserted into the handle to control the locking mechanism within the window frame. The handle releases the latch, allowing the window to open. During regular use and over time, handles for espagnolette may become damaged.

Cadenza handles are a second type of uPVC window handle, which is typically used on tilt and turn windows. They have a protruding knife that operates a multiple-point locking mechanism inside the window. They are more secure than an espagnolette handles since they only open from the inside. You can replace them using the same procedure as you would with espagnolette handles however, make sure that the new handle is angled and not flat.

After you have chosen the correct handle, you can align the new handle to existing screw holes prior to fixing it with screws. Then, put the screws back on and make sure the new handle functions properly. This is accomplished by shifting the handle from the locked position to the unlocked and the reverse direction several times. If you have any issues, it may be worthwhile contacting a professional to see if they can help resolve the problem. They can often advise you on the best approach to resolve the issue in a fast and efficient manner.