Company Logo

• 목록
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are a great option for modern homes. They are durable, long-lasting and easy to maintain. They are not susceptible to decay or rust as timber and aluminum.

Regularly cleaning and lubricating UPVC windows and doors is vital. This will help avoid unnecessary repair costs as well as increase energy efficiency.

1. Broken Glass

If the glass in your window is broken it can cause a great deal of damage to your home, which can make it very hazardous and possibly fatal. It is essential to take the time to ensure that you're doing all you can to keep your windows in good repair.

For single pane windows, it is fairly easy to replace windows, and the new one will usually fit inside the old frame very easily. If you have double-paned windows which are joined by internal beading, it is difficult to remove and replace the old panes. In this instance you'll need to source some plastic spacers to assist the new pane to fit perfectly into the frame of the window.

Wearing eye protection and heavy gloves is a must when you are planning to remove the glass by yourself. It is also recommended to lay down a dropcloth before you begin working on the window panes so that any shards of glass fall onto the fabric, not onto the floor and could be trampled under.

It's a good idea to tape the gap once the glass has been removed. This will prevent drafts and water from entering your property until a professional is able to fix the window repair near me. This will also act as a barrier that will prevent any intruders from gaining entry into your home. If the gap between the door and the window is large, you might want to use an alarm system that includes an opening. This will provide the best of both.

2. Sagging

uPVC is durable and energy efficient alternative to timber sash windows. In time, they could be affected by a variety of issues that include sagging. A sagging window can cause problems with light, draughts, and even security. It is crucial to act immediately if you realize that your uPVC windows are sliding.

Repositioning the hinges could help fix a window that is sagging. First, you'll need to unblock the windows so you can reach the frame. After that, using the screwdriver, you'll be able to unscrew the top and bottom hinges and adjust them by turning them clockwise or anti-clockwise. After you've repositioned the hinges, shut your window and verify the fit. If you're satisfied with the fit, tighten the screws to ensure they remain in the right place.

If you aren't able to move the hinges, you may need to replace the seal. Rubber seals may dry out and lose their elasticity over time, causing them to loose their elasticity. If this happens, it's crucial to replace the seal as fast as you can to ensure that your uPVC windows remain watertight and secure from draughts.

uPVC handles may also loosen up. The majority of the time this is due to screws that have become loose over time. However, it can occur because the handle mechanism has worn out. It's relatively easy to fix a loose uPVC handle. The first step is to close the window and then perform a test to ensure that it fits. The corners of the sash must be aligned with the casing joint. If it doesn't then you can make use of a screwdriver to loosen the handle and return the mechanism to its original position.

3. Water Leaks

It is important to take action if you awake each day to find a smoky wall and floors that are wet. Water leaks from windows not only lead to the destruction of your home's structure but also hinder your efforts to control the temperature inside your home. The most frequent reason for leaking uPVC windows is that the sealant surrounding the frame has been damaged or is missing.

This is a fairly simple fix and should be undertaken by any competent DIYer. Depending on how severe the issue is, old caulking may have to be removed. It is important to keep in mind that when it comes to uPVC window repairs, do avoid the temptation to "over-caulk in order to make the area harder to clean and could reduce your energy efficiency.

Make sure that the drainage holes do not have debris inside them and that the sill pan is properly angled to drain away from the window. In more serious situations, you may have to replace the window.

Moldy sills and rotten ones are other signs of water leakage. This fungus thrives in damp conditions and can quickly spread across the home.

It is also important to note that if the leak is coming from between the glass in your double glazed windows, it is more likely to be an issue with the glass seal, rather than the frame or sliding. It is also possible to be repaired by a upvc window repairs near me window repair (experienced) window specialist who will replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be at fault for the reason that your uPVC window is difficult to open or it opens in a breeze. They can be replaced by any competent DIYer and can usually be done within a few minutes.

Like any mechanical component hinges will be damaged over time. Changing a window hinge is essentially a simple process but it can be easier when you have a person to assist in holding the frame up.

It is also important to ensure that the uPVC hinges are opened and closed in the correct direction. You can do this by checking for the arrows on each hinge. This indicates the direction in which the window should be opened.

Window hinges that aren't working properly can be caused by incorrectly opening the window a certain way or due to inadequate installation at the factory. Sending us photos via our website will often resolve the problem. We are happy to offer advice.

Regularly lubricating hinges is also essential. This can be done by applying a light engineering oil on the hinges. We suggest using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regular lubrication can make the window easier to open and close. It can also reduce the possibility of a window sticking and prevent corrosion. This is recommended to be done at least every year. WD40 and other solvent-based lubricants are not recommended as they can damage your uPVC windows.

5. Draughts

Draughts in upvc windows can be caused by different factors. The hinges can also become misaligned due to wear, creating a gap between the frame and sash. These can be easily repaired by giving them good clean, but when they're beyond repair, it may be necessary to have them aligned or replaced. In addition, the interlock could be unbalanced. This happens on the hinge's side and could require to be cleaned. In certain instances, it may be necessary to replace the hinges.

These seals are susceptible to wear and tear or become damaged over time, allowing air to escape. Replacement of these with high-quality weatherstripping can help prevent draughts. Another option is to replace the window with low-emissivity glass. this will help in regulating indoor temperatures, and also lessen draughts.

Another method of reducing drafts effectively is to use a Draught-exclusion device. These are usually made of fabric tubes filled with a filler, which can be hung over your window sill. These will keep your home warm by blocking out cold air.

Your upvc windows can continue to provide excellent insulation and security in your home with regular maintenance and repairs. It is crucial to keep in mind that all windows will eventually wear out and it may be more cost-effective to simply replace them than to repair them. If you are experiencing issues with your Upvc window, it's best to consult a professional as soon as possible.