Company Logo

• 목록
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is an excellent option for modern homes. They are durable, long-lasting and easy to maintain. They don't decay or rust as timber and aluminum.

It is important to clean and oil UPVC doors and windows on a regular basis. This will save you from unnecessary repair costs and improve energy efficiency.

1. Broken Glass

If the glass in your window is broken it could cause a large deal of damage to your home, which can make it extremely dangerous and possibly fatal. It is essential to take the time to make sure that you're doing everything you can to ensure that your windows are in good condition.

Single-pane windows are fairly simple to replace and generally fit into frames of the past easily. However when you have double-pane windows that are held in place by internal beading, it'll be more difficult to remove the panes that are in place and replace them with new ones. In this instance, you will need to locate some plastic spacers to assist the new pane to fit correctly into the window frame.

Wearing eye protection and thick gloves is essential for anyone who plans to remove the glass yourself. It is also a good idea to lay down a drop cloth before you begin working on the glass to ensure that any fragments of glass fall on the fabric rather than on the floor, where they could be trodden under and cause further damage.

Once the glass has been removed and the glass is removed, it's a good idea to cover the gap with some clear packaging tape or duct tape to block water and drafts from entering the home until a professional is able to come out and fix the window. It also acts as a barrier that will prevent any intruders from gaining entry to your home. If the gap is particularly large, you might think about an alarm door that comes with an integrated window, as it will provide the best of both worlds.

2. Sagging

uPVC is a durable and energy efficient alternative to timber sash windows. However, over time they can suffer from a variety of problems including sliding. A window that isn't properly aligned can cause problems with light, draughts or even security. It's important to take action when you discover that your uPVC windows are sliding.

Repositioning the hinges can aid in fixing a window that is sliding. First, you'll need to unblock the windows to access the frame. Then, using a screwdriver, you can take off the hinges on the top and bottom and adjust them by turning them clockwise or anti-clockwise. Close your window repair near me to check the fit after having moved your hinges. If you're satisfied with the fit, tighten the screws to ensure that they stay in place.

If you cannot reposition the hinges, you may have to replace the seal. As time passes, rubber seals lose their elasticity and become dry, which causes their tightness to decrease. If this happens, it's important to replace the seal as fast as you can to ensure that your uPVC windows are waterproof and secure from draughts.

upvc window Repair handles can also become loose. The majority of the time it is due to screws that have come loose over time. However, it can occur because the handle mechanism has been worn out. It's relatively simple to repair a loose uPVC handle. First, you'll need to close the window and do a test fitting. The corner joints of the sash should be aligned with the casing joint. If it doesn't, you can use a screwdriver to loosen the handle and turn the mechanism back into its original position.

3. Water Leaks

It is important to act if you wake up every morning to find a smoky wall and floors that are wet. Leaks of water from windows can cause structural damage to your home and also impact your ability to regulate the temperature in your home. The most frequent reason for leaks in uPVC windows is that the sealant surrounding the frame is damaged or missing.

This is a relatively easy fix and should be undertaken by any DIY expert. Depending on how serious the problem is, the old caulking may need to be removed. It is essential to remember that when it comes to uPVC window repairs, do avoid the temptation to "over-caulk' as this will only make the area more difficult to clean and decrease the efficiency of your energy usage.

Verify that the drainage holes do not have debris in them, and also that the sill pan is properly angled to drain away from the window. In more severe situations, you may have to replace the window.

Other signs of long-term water leakage are sills that are rotten and the appearance of black spots of mold on the walls near the window. The fungus thrives in damp conditions and can quickly spread across the home.

If the leakage occurs between the double-glazed glass, it is more likely that the issue is with the seal rather than the frame. A uPVC specialist can easily fix this issue by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or slack and open with ease It could be hinges at fault. Any competent DIYer can replace the hinges in a matter of minutes.

Most households in the UK will have either top hung or side-hung uPVC windows that use hinges and, just like any mechanical component they can wear down over time. The process of replacing a hinge on a window is essentially a simple procedure, but it is simpler when you have a person to help you hold the frame in place.

Make sure that the uPVC hinges are closed and open in the right direction. Look for the arrows on each hinge to determine which way the window should be opened.

Window hinges that aren't working properly could be caused by improperly opening the window in a particular way or due to inadequate installation at the factory. Sending us a photo via our website is often enough to resolve the problem. We are always happy to offer suggestions.

It is also crucial to ensure that the hinges are lubricated on a regular basis. Applying a light engineering lubricant on the hinges is a great method to accomplish this. We suggest using a lubricant that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. It also helps prevent corrosion and decrease the chance of sticking. Ideally, you should perform this every year. WD40 or other solvent-based oils are not recommended as they could damage your uPVC windows.

5. Draughts

Draughts in upvc windows can be caused by a variety of different things. The hinges can also be unbalanced due to wear, causing an opening where the sash meets frame. If they are damaged beyond repair, it might be required to realign them. In addition, the interlock could also become unbalanced. This happens on the hinge's side and could require to be cleaned. In some cases, it may be necessary to replace the hinges.

The next common reason for draughts is window seals. These are prone to wear or damaged over time, and allow air to escape through the gaps. Replacement of these with high-quality weatherstripping is a good way to keep draughts at bay. Replace the windows made of upvc with low-emissivity glass. This will help to regulate indoor temperatures and lessen draughts.

The last way to reduce drafts effectively is to use a Draught-exclusion device. These are typically fabric tubes filled with a filler that can be hung over your window sill. They will help stop cold air from entering and keep your home warm and cozy!

Your upvc windows can keep providing excellent insulation and security for your home with regular maintenance and repairs. It is crucial to recognise that all windows have a life span and eventually, they will reach the point when it's more economical to replace them than fix them. So, if you're experiencing problems with your upvc windows, it is recommended to seek help from a professional as soon as you can.