Company Logo

• 목록
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is a great option for modern homes. They are easy to maintain and durable, as well as long-lasting. In contrast to aluminium and timber, they don't rust or rot.

Regularly cleaning and lubricating UPVC windows and doors is crucial. This will help prevent costly repairs and improve energy efficiency.

1. Broken Glass

The damaged glass in your windows can cause significant damage to your home, and could even be fatal. It is important to take the time to make sure that you're doing all you can to keep your windows in good shape.

For single pane windows it is fairly easy to replace them, and the new window will generally fit within the old frame very easily. However, if you have double-pane windows that are anchored by internal beading, it'll be more difficult to take out the existing panes and install new ones. In this instance, it is necessary to purchase plastic spacers to aid in fitting the new pane into the window frame.

If you're planning to try to remove the window panes by yourself it is crucial to wear the proper safety gear that includes gloves with a thick layer of material and eye protection. It is also recommended to lay down a drop cloth before you begin working on the window panes so that any shards fall onto the fabric and not on the floor, where they could be trampled under.

Once the glass has been removed, it's a good idea to cover the gap with some clear packaging tape or duct tape to prevent drafts and water from entering the property until a professional can come out and fix the window. It also acts as an obstruction to prevent intruders from getting into your home. If the gap is particularly large, you may think about a security door that has an integrated window as this will offer the best of both worlds.

2. Sagging

Upvc windows and doors are an affordable, durable and energy-efficient alternative to timber windows with sash. As time passes, they may develop a number of problems such as sliding. A window that isn't properly aligned can cause problems with light, draughts and even security. It's crucial to act as soon as you realize that your uPVC windows are sliding.

Repositioning the hinges could aid in fixing a window that is sliding. To do this, you'll have to open the window to get to the frame. You can then unscrew both the hinges at the top and bottom with a screwdriver and adjust them clockwise or counter-clockwise. Close your window to test the fit after having repositioned your hinges. If you're satisfied with the fit, you can tighten the screws until they stay in the right place.

If you are unable to reposition the hinges, you may require replacing the seal. Over time, rubber seals lose their elasticity and become dry, which causes them to lose tightness. If this happens, it's important to replace the seal as fast as you can to ensure that your uPVC windows are waterproof and draught-proof.

uPVC handles can also loosen up. This is typically caused by screws that have become undone over time, but it can also be caused by the handle mechanism getting worn out. It's relatively simple to fix a loose uPVC hand. First, you'll need close the window and then perform an initial test fit. The joint at the corners of the sash should align with the joint on the casing. If it isn't then you can use the screwdriver to loosen the handle. Then, you can turn the mechanism back into place.

3. Water Leaks

If you awake to wet floors and damp walls every time it rains it's important to take action. The leaks of water from windows do can not only cause degradation of your home's structure but also hinder your efforts to control the temperature in your home. Most of the time, uPVC window leaks are caused by a damaged or missing sealant.

This is an easy fix that can be accomplished by anyone who is a DIYer with the skills. Depending on the severity of the problem the old caulking may need to be removed before a new layer can be put on. It is crucial to keep in mind that when it comes to uPVC window repairs you should not be tempted to 'over-caulk and then make the area harder to clean and could reduce the efficiency of your energy.

It is crucial to make sure that the drainage holes are clear of debris and that the sill pan has been angled properly so that it drains away from the window. In more serious cases you may need to think about replacing the window repairs.

Mold spots and rotted sills are other signs of water leakage. This fungus thrives in damp conditions and can spread quickly throughout the house.

It is also important to remember that if the leak originates from the glass of your double glazed window repairs-glazed windows, it's more likely to be a problem with the glass seal, rather than the frame or sagging. Again this can easily be repaired by an uPVC window specialist who will replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be the reason if your uPVC window is difficult to open, or if it blows open with the breeze. Anyone who is a skilled DIYer can fix these in a matter of minutes.

Like any mechanical component hinges will be damaged over time. The process of replacing a hinge on a window is essentially a very simple procedure, but it is easier if you have someone to help you hold the frame up.

It is also worth checking that the uPVC hinges are opening and closed in the right direction. You can check this by looking for the arrow on each hinge. This indicates which way the window should be opened.

Window hinges that aren't working properly could be the result of incorrectly opening the window in a particular way or by inadequate installation at the factory. It is usually possible to fix the issue by sending us a photograph through our website and we will be happy to give you suggestions.

Regular lubrication of the hinges is essential. Applying a light engineering lubricant to the hinges is a good method of doing this. We recommend using an oil that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can allow the window to operate and close more easily. It also helps prevent corrosion and decrease the chance of sticking. The ideal time to do this at least once a year. WD40 or other solvent-based lubricants should not be used as they can cause damage to your uPVC windows.

5. Draughts

Draughts in windows made of upvc can be caused by a few different factors. The hinges can also become unbalanced due to wear, which can cause a gap between the frame and sash. They can be fixed by giving them a good cleaning, but if they are beyond repair it may be necessary to have them realigned or replaced. In addition, the interlock could be unbalanced. It is located on the hinge side and might require to be cleaned. In some cases it might be necessary to replace the hinges.

The seals may wear out or get damaged over time, allowing air escape. Replacing these with high-quality weatherstripping can help keep draughts at bay. Another option is to replace the window with low-emissivity glass, this will help to regulate indoor temperatures and will lessen the risk of draughts.

Another method of reducing draughts effectively is by using a draught-excluder. These are usually fabric tubes filled with a filler which can be hung over your window sill. They can keep your home warm by blocking out cold air.

Your upvc windows can continue to provide excellent insulation and security to your home with a little regular maintenance and repairs. It is important to remember that all windows will eventually become worn out, and it could be more cost-effective to replace them than to repair them. If you have any problems with your window made of upvc, it's best to consult an expert as soon as you can.