Company Logo

• 목록
• 게시판 리스트 옵션
  • 수정
  • 삭제

Sliding Patio Doors Repairs

Your sliding patio doors will bring in natural light to your home, and will increase its energy efficiency. However, over time they could show signs of wear and tear that require a bit of maintenance.

Most sliding patio door problems are fairly easy to fix. Find out how to keep your sliding patio doors looking and working like new.

Dirty or damaged tracks

One of the most frequent causes of sliding patio doors that don't open is dirty or clogged tracks. Over time, the dirt and grime from everyday use can build up on the track. This could cause the door jam to become damaged or break completely.

Regularly cleaning sliding doors and their tracks as part of your household chores can help minimize this accumulation. Start by brushing or vacuuming any big debris from the tracks, and then wipe them clean using warm water and a non-abrasive cleaner, such as dish soap. A little vinegar added to your cleaning product can help in removing stubborn grease and dirt staining.

If you find that your sliding door doesn't move smoothly after following these steps, it could be a sign of more serious damage that requires professional repair or replacement. However, there are many simple fixes that you can try before calling experts to save on costly repairs or replacements.

Place a doormat under your sliding doors. This will help to keep dirt out of the tracks. It is also important to trim any plants or bushes near your sliding doors to minimize the amount of debris that gets tracked into the tracks. Finally, be sure to close the door properly so it doesn't slam into the tracks and cause damage to the wheels and rollers. By keeping your doors clean and lubricated you can prolong their lifespan considerably.

Rollers that are misaligned

Sometimes, a patio may become out of alignment. It is usually due to obstructions such as dirt or other that can be easily removed. But sometimes it can be due to bent tracks or rollers. In this case it is possible to realign the roller by removing them using their adjustment screws and then cleaning them using rubbing alcohol. Be cautious when working with these parts, as they can be delicate.

If your doors still stick, you can try lubricating the rollers to reduce friction and allow them to slide. It is best to make use of a silicone-based lubricant because petroleum-based lubricants can attract dirt faster. It is also crucial to clean the tracks and rollers prior to lubricating them.

After you've cleaned the rollers, you can reinstall them using their adjustment screws. Make use of the same lubricant you used to clean them. When reinstalling the rollers, be sure to push them completely into their channels. You can test the door and see if it glides smoothly.

If the problem persists, it might be necessary to take down your door and check the tracks and rollers for any other issues. If the rollers or tracks are bent badly, they may need to be replaced. In this case, it's a good idea to contact a professional for the installation.

Warped Glass

sliding patio door repair service near me glass doors are ideal for bringing outside into a room and letting in natural sunlight however, they can also be susceptible to damage that needs repair or replacement. Some of the most frequent problems that arise are warping, cracking and fading. The materials that make up the sliding glass patio doors begin to break down when exposed sunlight, heat and other environmental elements. Cracks are often caused by impact damage, such as from a lawn mower or ball run-in, whereas fading typically occurs due to repeated contact with sunlight and other elements found in nature.

If you have sliding glass patio doors that are hard to open and close, this could indicate that the rollers and tracks aren't working properly. This issue could be caused by accumulated dirt or rust on the track or wheels or due to a lack of or lubrication. Regularly cleaning the tracks and rollers, removing obstructions and applying silicone spray can help resolve this problem.

The locking mechanism may also be faulty which makes it difficult to open or close your sliding patio doors. It could be caused by misalignment, wear and tear or an amalgamation of both. To fix this issue, simply adjust the locking mechanism by turning the adjustable screws on the bottom.

Air leaks or drafts around your sliding patio doors are a typical issue that can significantly decrease their energy efficiency. They usually result from damaged weather stripping or poor alignment of the doors that is easily fixed by replacing the old weather stripping and re-aligning the doors.

Loose Handle

It can be a hassle when the handle of the sliding door is loose. It makes it difficult to open. This issue is usually caused by an incorrectly aligned locking mechanism which can be corrected by loosening the screws that hold it in place and tightening them until they fit against the jamb of the door.

Another reason that is commonly cited for a loose handle is that it has separated from the spindle that connects it to the interior and exterior handles. This is usually the result of a mix of factors, including over use, wear and tear, or just general ageing. If the problem is not resolved promptly, it may eventually lead to the entire handle becoming loose, and possibly falling off completely.

To solve this issue, you should first locate the screws that connect the interior and exterior handles. These screws are usually hidden behind plastic tabs that can be removed using a flathead (or a Phillips head screwdriver, in some cases) screwdriver. Keep these screws in a safe place to avoid losing them.

Once the handles that were previously used have been removed, the next step is to remove the spindle that is loose. This can be done by tapping the end of the spindle using the hammer until it's freed from its position within the door. Then, the new handle can be fitted by simply putting the spindle through the hole in the handle inside and inserting the other end of the spindle through the hole in the outside handle. Once the handle has been installed, tighten it by screwing back the screws, and then check to ensure that the lock and unlock mechanism functions correctly.

Afflicted Weatherstripping

Weatherstripping that is cracked or worn can let air and water be able to seep into your patio door, which can compromise your home's comfort and energy efficiency. It could let in moisture and create drafts that will increase your heating and cooling costs. It's simple to replace defective weatherstripping with no professional help. The first step is to take off the old stripping by loosing its staples using an screwdriver or pinning it gently using a putty knife, and then lifting it away from the door. After that, you can clean the area and apply a new layer of weatherstripping, which is backed by a foam seal to stop leaks and improve comfort.

If your sliding patio door is not working as it should, you have to address the issue immediately to prevent further damage and to keep them functioning for years to come. Depending on the severity of the problem is the best option is an DIY solution or a professional repair/replacement might be the best option.

The majority of sliding patio door issues are caused by dirty rollers, misaligned tracks, or a loose handle. These issues are usually addressed by regular maintenance and cleaning, such as applying lubrication and adjusting the track and tightening the hardware. If these steps aren't working, it's best consult a professional for advice to make sure that your patio door is operating exactly as it should. Before you decide to replace or repair your patio door, make certain to verify its warranty information to confirm that it's covered by the manufacturer's guarantee. This will save you money in the long run on repairs and replacements.