Company Logo

• 목록
• 게시판 리스트 옵션
  • 수정
  • 삭제

Protect Your Pride And Joy With The Ghost Immobiliser

Protect your pride & joy against theft by using the Ghost Immobiliser. It's discreet and doesn't require additional key fobs.

The device uses buttons on your vehicle (steering wheels doors, door panels, and the centre console) to generate a unique pin code sequence that can be altered up to 20 times. This then authorizes the start-up of your vehicle.

Simple PIN code change process

With the increasing rate of vehicle thefts, many owners are looking to upgrade their security. There are a variety of security gadgets that are sold aftermarket, from tracking systems to alarms and immobilisers. They're not all equally effective at protecting your car. A tracking device can help you locate your vehicle if it's stolen however, it won't stop the crime. Immobilisers, however, do exactly what they state on the tin - they shut down the motor of your car so that it can't be started. The Autowatch Ghost is one of the most advanced options available, making it nearly impossible for thieves to steal your vehicle.

Utilizing the buttons already in your car The ghost device generates a unique sequence which must be entered before the car's engine will start. This can be done via the indicator stalk or window buttons. In addition to this it is possible to use a mobile app which acts as an emergency PIN code bypass and allow the driver to operate the car without the button sequence. This option is particularly useful when you need to hand your car over for valet parking or servicing because the immobiliser is activated, but not disabled.

The Ghost is a very unique and ingenious device that works in conjunction with the buttons on your vehicle rather than being a standalone device. It's not just an effective deterrent to vehicle theft, but it can be used to secure any future vehicles you own. This makes it a better investment than a traditional wheel lock.

Small, weatherproof device

The Autowatch ghost immobiliser birmingham Immobiliser is a high-tech security system that protects your vehicle from key cloning and hacking. It also blocks ECU swapping. It is a weatherproof tiny device that connects directly to your vehicle's ECU over the CAN data bus to disable the engine. It can be fitted into the vehicle without any wiring, and has been thoroughly tested to ensure compatibility with all vehicles. It also is resistant to jamming devices which are a typical technique used by thieves to bypass immobilisers.

The benefit of CAN data over traditional systems is that they work silently. It is not able to be detected by sophisticated RF scanning and code-grabbing technologies, nor can it be detected by traditional diagnostic tools. The Autowatch ghost doesn't emit LED indications and uses the buttons in your vehicle like the steering wheel or centre console panels to create a unique, changeable disarm sequence. You can even make this sequence as long as 20 presses for added security. The iPhone app allows a single, authorised connection, with a pairing code that is unique to the Ghost and communication between the two devices is encrypted.

The Ghost stops car thieves from adding an ignition key that is not in use or replacing the ECU in order to bypass the immobiliser. The engine can only be started if a valid PIN code is entered. It can also be put into Valet/Service mode for temporary operation (with defined parameters like a 30mph speed limit) so that you can hand your car over to a valet service or to be serviced without needing to enter a PIN code.

Tested for each vehicle

The Autowatch Ghost is the world's first aftermarket immobiliser on the CAN bus that can be connected to your vehicle's existing wiring and connects to your engine control unit (ECU). The device intercepts electronic signals to block the system of your vehicle from running its normal start-up routine until you input the passcode you have created. The system can be activated or deactivated through your smartphone's app without the need for wires.

The standard factory immobilisers function with a transponder which is built into the key. This sends a message to the ECU. The car will start when the correct code is sent. However, if the transponder from another vehicle is used instead, the immobiliser will not recognize it. This makes it possible for the vehicle to be stolen and then started. The Ghost immobiliser was developed by a South African company at the top of security systems for vehicles technology. It guards you against hacking or key cloning, and even key theft. Only by physically towing your car away can thieves steal it and not be able to drive the vehicle.

Ghost uses buttons on your vehicle, such as the indicator stalk, the steering wheel, and the door panels, to generate unique PIN codes that needs to be entered in order to use your vehicle. This is done without any extra hardware, such as key fobs. It can take up to 20 presses. It is also undetectable to diagnostics equipment and does not transmit radio frequency signals so thieves cannot use sophisticated RF scanning or code-grabbing technology to detect that a security system has been installed.

Ghost is more difficult to remove than car alarms that require disarming using a series of buttons. This makes it a great alternative to an GPS tracking device which can be used to track your vehicle after it's been taken.

Emergency PIN code override

You don't have to look far on social media to see stories or even videos of vehicles that were stolen by thieves using the most advanced technology tools available to them. This includes key-cloning and hacking devices that allow the vehicle to start without the original keys.

The Ghost immobiliser helps combat this and fitted provides you with an additional layer of security to prevent your vehicle from being taken when it is targeted by thieves. It generates an individual pin code by pushing the buttons on your steering wheel, door panel and on the centre console. The unique pin code is entered along with your original key fob in order to prevent the engine from starting. The unique override PIN can be found on the black card you will receive following your installation. It's easy to remember since there aren't any LEDs.

The device is hidden inside the vehicle's wires and doesn't emit any radio signals, so it can't be detected by modern thieves using diagnostic software that is able to recognise what type of security system you have installed. This makes it a fantastic alternative to a tracker.

Contrary to most security systems, which have a relay inside the engine bay these CANBUS Immobilisers communicate with the car's ECU and BCM via CAN data bus (brand dependant). This allows them to disable a vehicle completely by sending an electronic block to the ECU and engine.

They can also be connected to an analog alarm, immobiliser or tracker. This should be specified prior to installation. They are also fully service/valet mode compatible and a good alternative to a tracker you are taking your car in for an electrical fault at the dealership.

Service/Valet mode

In recent times there has been a rise in the number of vehicles that are stolen without owners' keys. With the ease of access to key cloning tools and door lock pick sets, it is now much easier for thieves to take your pride and joy. To combat this we are now offering the Autowatch Ghost immobiliser that prevents your vehicle from being driven even if your keys were cloned or fitted your vehicle has been stolen.

It directly communicates with your car's ECU (Engine Control Unit) through the CAN data circuit. It's completely silent since it doesn't utilize radio frequencies or a key fob. It can't be detected by diagnostics or any other hacking device. It also protects the user from using a new ECU or key to circumvent the system, as only the PIN code allows the engine to be started.

The device is hidden inside your car and is accessible via buttons on your steering wheel, centre console and door panels. A unique and reversible PIN code sequence of up to 20 digits needs to be entered before you are able to start your vehicle.

This is the very first aftermarket CAN bus immobiliser that is being developed. It will stop your vehicle from being driven or even started if you don't enter a PIN code first. If the device is in armed and you try to drive away, it will display an indication on your dash, which will flash continuously for about 300m. If you enter your PIN code at this point, it will disarm the anti-hijack device and your car will continue to operate as normal. If you do not enter your PIN at this time, the indicator will continue to flash and require a new PIN code every time you attempt to start your car.