Company Logo

• 목록
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are an excellent choice for modern homes. They are easy to maintain and are durable and long-lasting. They are not susceptible to rot or rust like aluminum and timber.

Regularly cleaning and lubricating upvc window repair windows and doors is crucial. This will save you from costly repairs and increase energy efficiency.

1. Broken Glass

If the glass in your window is damaged, it could cause a large deal of damage to your home, which can make it very dangerous and potentially fatal. It is important to take the time to make sure that you are doing everything you can to keep your windows in good condition.

For single pane windows, it is fairly easy to replace them, and the new window will usually fit inside the old frame very easily. If you have double-paned windows that are held together by internal beading, it is more difficult to remove and replace the panes that were previously in use. In this case, you will need to source some plastic spacers that will assist the new pane to fit perfectly into the window frame.

If you plan attempt to remove the window panes by yourself it is important to wear appropriate safety gear, including thick gloves and protective eyewear. It is also recommended to lay down a dropcloth prior to you begin working on the window panes so that any shards fall onto the fabric, not onto the floor which could cause them to be trampled under.

Once the glass has been removed from the window, it's best to seal the gap with some clear packaging tape or duct tape to prevent water and drafts from entering the home until a professional can come out and fix the window. It also acts as an obstacle to stop intruders from making their way into your home. If the gap is large, you might want to consider using the security door with an integrated window, as it will provide the best of both worlds.

2. Sagging

Upvc is a long-lasting energy-efficient, cost-effective and economical alternative to timber sash window. However, over time they are susceptible to a range of issues, including sagging. A sagging uPVC windows can cause problems with light, draughts and even security. It is crucial to act as soon as you discover that your uPVC windows are falling down.

To fix a window that is sagging you can try to reposition the hinges. You'll first need to open the windows so you can get at the frame. With an screwdriver, unscrew the hinges on the top and bottom and adjust them by turning them clockwise or anti-clockwise. Close your window to test the fit after you have moved your hinges. If you're satisfied with the fit of the window, tighten the screws to keep them in place.

If you cannot reposition the hinges, you might have to replace the seal. Rubber seals may dry out and lose their elasticity over time, causing them to loosen. It is crucial to replace your seal as soon as you can to keep your uPVC window watertight and draughtproof.

uPVC handles could also become loose. Most often, this is caused by screws that have become loose over time. However, it could also happen because the handle mechanism has worn out. It's fairly simple to fix a loose uPVC hand. You'll first need to close the window and then perform an experiment fitting. The joints at the corners of the sash should be aligned with the joint on the casing. If it isn't you can use a screwdriver to loosen up the handle. Then turn the mechanism to position.

3. Water Leaks

If you wake up to wet floors and mouldy walls each time it rains, it is important that you take action. Water leaks from windows can not only cause degradation of your home's structure but also hamper your efforts to regulate the temperature within your home. Most of the time, uPVC window leaks are caused by damaged or missing sealant.

It is a fairly easy fix that can be done by any DIY expert. Depending on the severity of the issue is, old caulking might need to be removed. It is important to keep in mind that when it comes to uPVC window repairs you should not be tempted to 'over-caulk' as this will only make the area harder to clean and decrease the efficiency of your energy usage.

Make sure that the drainage holes are free of debris in them, and also ensure that the sill pan has been properly angled to drain away from the window. In more extreme cases, you may need to replace the window.

Mold spots and rotted sills are also signs of water leakage. This fungus thrives in damp conditions and can quickly spread throughout the home.

If the leakage is occurring between the double glazed window repairs near me-glazed window, repairs it is more likely that the issue is related to the seal, not the frame. A uPVC specialist can fix this problem by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or slack and blow open with ease it could be the hinges that are at the fault. Anyone with the skills to fix them can replace these in a matter of minutes.

Almost every household in the UK will have top-hung or side hung uPVC windows that use hinges and, like all mechanical parts, they can wear down over time. Changing a window hinge is essentially a simple procedure, but it is easier to do when you have a person to help you hold the frame up.

It is also important to verify that the uPVC hinges are opened and closed in the correct direction. Check for the arrows on each hinge to determine which way the window should be opened.

The issue can be caused due to opening the window in the wrong way or a faulty installation at the factory. It is usually possible to fix the issue by sending us a photograph via our website and we will be happy to give you suggestions.

It is also essential to grease the hinges on a regular basis. This can be accomplished by applying a light engineering oil on the hinges, we recommend using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It can also reduce the possibility of a window sticking and prevent corrosion. This is recommended to be done at least once a year. WD40 and other solvent-based lubricants are not recommended as they will damage parts of your uPVC window.

5. Draughts

Draughts can be caused by a variety of different factors. First, the hinges because of wear and tear, can become misaligned, this will cause a gap to form where the sash meets the frame. This can be easily repaired by giving them good cleaning, but in the event that they are beyond repair it could be necessary to get them re-aligned or replaced. Secondly the interlock, this is located on the hinge side of the window, may also become misaligned, again it is feasible to give them a clean but in some instances it could be necessary to get them replaced.

These seals are susceptible to wear and tear or get damaged over time, allowing air to escape. This can be prevented by replacing them with high-quality weatherstripping. Another alternative is to replace the upvc window with low-emissivity glass. this will help to regulate indoor temperatures and will reduce draughts.

Another method of reducing draughts effectively is by using a Draught-excluder. These are usually fabric tubes filled with a filler which can be hung over your window sill. These will keep your home warm by blocking out cold air.

With a bit of regular maintenance and repairs your windows made of upvc will provide excellent security and insulation for your home. It is crucial to keep in mind that all windows eventually wear out and it may be cheaper to replace them than to repair them. So, if you're having issues with your upvc windows, it is recommended to seek help from a professional as soon as possible.