Company Logo

• 목록
• 게시판 리스트 옵션
  • 수정
  • 삭제

Window Repairs

Window repairs can help homeowners save money and keep their homes warm. In the event of severe damage, such as broken glass or a shattered frame, a replacement window may be necessary.

However, many other issues can be repaired to extend the lifespan of your windows. The most frequent issues are:

Cracked or broken panes

Cracked windows could be caused by a lawnmowers that throws errant rocks or by the blow of a tree branch by strong winds. It's not just visually awful, but it could cause higher energy bills as broken glass lets cold air in to your home. Luckily, it's usually relatively simple to repair windows with broken panes.

Begin by carefully removing glass using gloves and sunglasses. You may need to use a utility knife to loosen old glazing compound or putty around the frame's edges. Then, clean the surface of the glass and the wood of the frame using a soft cloth or paper towel.

After the area is cleaned then apply a waterproof silicone caulking to the perimeter of the frame. This will stop water from entering through the crack, which can cause further damage to both the frame and the glass.

A bad crack in double-paned glass can affect the gas between the panes, making your windows less insulative. If the crack is so severe that it is threatening the structural integrity of the window, or if the pane inside is not there it is possible to contact an expert.

Cracks caused by thermal stress can occur when there is a significant temperature difference between your home and the outside. This causes the glass to expand and shrink. If this happens to two windows it's best to simply replace the pane instead of trying to repair it.

Clear tape can be used to fill cracks in windows that aren't yet ready for replacement. It also keeps out bugs and cold wind. You can cut a nylon stocking large enough to cover the entire crack, and then attach it using duct tape. This isn't a permanent solution however it can be useful in the event of a crisis and keeps insects and cold air away from your home. If your windows are old and you're beginning to see cracks in the glass, it's a good idea to check with the local upvc window repairs near me company to determine if replacing the entire window would be the best option for you.

Rotten Wood

Wood rot is a typical problem with windows. It can affect the appearance of a house and it can also pose an hazard to safety. It is possible to fix damaged wood. First, you need to make sure that the source of the rot has been addressed. Check for roof leaks and other areas where water could get into the wood.

The next step is to take out any rotten parts of the window frame. This can be done with either a chisel, a rasp or claw hammer. Once the rotten areas have been cleared, you will need to replace them with new wood. Pre-treated wood is recommended for this project since it will resist rot. If you are unable replace the rotted wood then you can use wood hardener or filler to repair the damaged area. Many hardware stores will have this type of product. Follow the instructions on the label of the product to get the best results.

After you have replaced the rotten areas of the windowsill, it is important to protect the repaired area. You can do this by applying a waterproof wood sealant. Sikkens, for example is a fantastic product to use.

It is also possible to use an epoxy filler that is two-part to protect the wood from further damage. It is easy to apply and leaves a nice finish. However, it is very important that you adhere to the instructions for window repairs application on the label. Once the epoxy filler has dried it is possible to sand the wood's surface. It is recommended to begin with a rough piece of sandpaper, and then progress to a smoother one.

You don't want to expose your damaged part to further moisture. It is recommended, therefore, to protect the surface you have repaired with an oil-based prime that will protect it from moisture. After that, you are able to reapply the wood sealant that is waterproof.

The W won't let you open

A window that isn't opening could be due to various factors. The house could have settled, or the wood frames may have warped in wet weather. Someone might have also nailed them shut for security. But with some patience and the right tools, many windows that are locked can be opened.

The accumulation of gunk or debris can be a major cause of a window not opening. Acme Glass notes that dirt and grime build up over time on hinges, sliding tracks and locks. Metal hardware can also rust if it comes in contact with humidity and direct sunlight. Spray grease on these areas can aid in preventing oxidation and keep your windows functioning correctly.

The pulleys used to raise or lower the window may be loosened, or window repairs break. These parts can lose tension and become obstructed when they are situated higher than two floors higher than the surface.

If you have trouble opening a door, you can use a pry-bar to gently open the window. Put a block on the frame of the window to give the pry bar more leverage. Be careful not to harm the wood or the window. Try running a hairdryer along the frame's edges for several minutes. This will warm the wood, making it easier to move.

A broken spring could be the reason for windows that don't raise or lower. Depending on who manufactured the windows, you'll be required to refer to your owner's manual for further instructions.

If you've tried cleaning and lubricating the moving components on your windows, but they still cannot open, it may be time to replace the windows. Homespire Windows & Doors offers windows that are energy efficient. Don't let your windows slip from functional to inoperable, as a window that isn't properly shut can make your home vulnerable to burglary and water damage. Contact our team today to learn more about our replacement windows and services!