Company Logo

• 목록
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are a great option for modern homes. They are easy to maintain and are durable and long-lasting. They do not decay or rust as aluminum and timber.

Regularly cleaning and lubricating UPVC windows and doors is vital. This will save you from unnecessary repair costs and also increase energy efficiency.

1. Broken Glass

If the glass in your window is broken it can cause a great deal of damage to your home, making it very hazardous and possibly fatal. It is important to ensure that your windows are in good condition.

Single-pane windows are relatively easy to replace and will usually fit into the old frames very easily. If windows with double panes are joined by internal beading, it is more difficult to remove and replace the old panes. In this case it is essential to purchase plastic spacers to make sure that the new pane fits into the window frame.

Wearing protective eyewear and thick gloves is essential for anyone who plans to remove the glass by yourself. You should also lay down a dropcloth prior to you begin working on the window panes, so that any shards of glass fall onto the fabric and not onto the floor which could cause them to be trampled under.

It's a great idea seal the gap after the glass has been removed. This will keep water and drafts from entering your home until a professional comes out to fix the window. This will also provide an obstacle to stop criminals from getting into your home. If the gap between the window and the door is significant, you may prefer a security screen that also includes windows. This will give you the best of both.

2. Sagging

Upvc windows and doors are a low-cost, durable and energy-efficient alternative to timber windows with sash. However, over time they may be afflicted by a variety of problems including sagging. A window that isn't properly aligned can cause problems with light, draughts or even security. If you find that your uPVC window is beginning to sag it's crucial to act fast to stop the issue from worsening.

To fix a sagging window you can try to reposition the hinges. You'll first need to open the windows to get at the frame. Then, using the screwdriver, you'll be able to unscrew the hinges at the top and bottom and adjust them by turning them clockwise or counter-clockwise. Close your window to test the fit after you have repositioned your hinges. If you are happy with the fit of your window, tighten the screws to secure them in the right position.

If you aren't able to move the hinges, you may need to replace the seal. Rubber seals may dry out and lose their elasticity with time, which causes them to loose their elasticity. If this happens, it's essential to replace the seal as soon as possible so that your uPVC windows remain watertight and draught-proof.

uPVC handles can also loosen up. Often it is due to screws that have come loose over time. However, it could also happen because the handle mechanism has worn out. It's relatively simple to fix a loose uPVC hand. You'll first need to close the window and then perform a test fitting. The joint at the corners of the sash must align with the joint on the casing. If it doesn't then you can use the screwdriver to loosen the handle. Then, you can turn the mechanism to position.

3. Water Leaks

It is crucial to take action if awake each day to discover mouldy walls and Window Repairs wet floors. Water leaks from windows are not just a cause for degradation of your home's structure but also hamper your efforts to control the temperature inside your home. The most common reason for leaking uPVC windows is that the sealant surrounding the frame is damaged or not present.

This is a fairly simple fix that can be completed by any DIY expert. Depending on how serious the issue is, old caulking might need to be removed. It is crucial to remember that when it comes to uPVC window repairs, do not be tempted to 'over-caulk in order to make the area more difficult to clean and can decrease the efficiency of your energy usage.

It is essential to ensure that the drainage holes are free of debris and that the sill pan has been angled properly so that it drains away from the window. In more serious cases you might need to consider replacing the window.

Other signs of long-term water leakage include sills that are rotten and the appearance of black spots of mold on the walls near the window. This is a fungus that thrives in damp conditions and can quickly spread throughout the home.

It is also important to keep in mind that if the leakage is coming from between the glass of your double glazed windows it may be more likely to be an issue with the glass seal rather than the frame or sagging. A uPVC specialist can easily solve this problem by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or loose and open in a breeze It could be the hinges that are at the fault. These are easily repaired by any DIYer who is skilled and can be done within a few minutes.

Like any mechanical component, hinges can be damaged over time. Changing a window hinge is an easy process, but it's easier to do with someone else to assist in holding the frame in place.

It is also important to ensure that the uPVC hinges are opening and closed in the right direction. Look for the arrows on each hinge to determine which way the window should be opened.

The problem can be caused either due to opening the window in the wrong way or by a poor installation in the factory. This can often be resolved by sending us a picture on our website. We will be pleased to offer you suggestions.

Regularly lubricating hinges is also essential. This can be done by applying a light engineering oil to the hinges, we recommend using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regular lubrication can help the window open and close more easily. It also decreases the possibility of a window getting stuck and stop corrosion. The ideal time to do this at least once a year. WD40 and other solvent based oils are not recommended because they could damage parts of your uPVC window repairs near me.

5. Draughts

Draughts in Upvc windows can be caused by a few different things. Firstly the hinges, again due to wear and tear may become displaced, which causes an opening to appear where the sash meets the frame. If they are beyond repair, it might be required to realign them. The second is the interlock, which is on the hinge side of the window and can also be misaligned, and again it may be possible to give them a good clean, but in some instances it could be necessary to have them replaced.

These seals are susceptible to wear and tear or be damaged over time, allowing air to escape. Replacement of these with high-quality weatherstripping will help to prevent draughts. Another option is to replace the window with glass that is low-emissivity, which will help regulate indoor temperatures, and also lessen the risk of draughts.

Lastly, one of the most effective ways to cut down on draughts is by using an draught excluder. These are typically fabric tubes which are filled with a sort of filler and can be placed on the top of your windowsill. They can help keep cold air out and keep your home warm and cosy!

Your upvc windows can keep providing excellent insulation and security to your home by performing regular maintenance and repairs. It is crucial to keep in mind that all windows eventually get worn out and Window Repairs it is more cost-effective to simply replace them than to repair them. If you encounter any issues with your upvc window, it's best to consult a professional as soon as possible.