Company Logo

• 목록
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is a fantastic option for modern homes. They are easy to maintain and durable, as well as long-lasting. They are not susceptible to rot or rust like timber and aluminum.

Regularly cleaning and lubricating UPVC windows and doors is essential. This will help prevent costly repairs and improve energy efficiency.

1. Broken Glass

If the glass in your window has been damaged, it can cause a great deal of damage to your home, which can make it very hazardous and possibly fatal. You should take the time to ensure that your windows are in good working order.

For single pane windows, it is fairly easy to replace windows, and the new one will generally fit within the old frame very easily. If you have double glazed window repairs-paned windows that are held together by internal beading, it will be more difficult to remove and replace the panes that were previously in use. In this situation you'll need to find some plastic spacers that will help the new pane to fit properly into the frame of the window.

Wearing eye protection and thick gloves is essential when you are planning to remove the glass by yourself. It is also a good idea to lay down a drop cloth before you begin working on the glass so that any shards will fall on the fabric rather than on the floor, where they could be trampled upon and cause further damage.

Once the glass is removed from the window, it's best to seal the gap with some clear packaging tape or duct tape to prevent water and drafts from getting into the property until a professional can come out and repair the window. It also acts as an obstruction to prevent intruders from getting into your home. If the gap is large, you might want to consider using an alarm door that comes with an integrated window, since this will offer the best of both worlds.

2. Sagging

uPVC is durable energy-efficient, cost-effective and economical alternative to timber sash window. However, over time, they may be afflicted by a variety of issues, including sliding. A sagging uPVC window can cause problems with light, draughts, and even security. It's important to take action immediately if you notice your uPVC windows are falling down.

Repositioning the hinges can help fix a window that is sagging. To accomplish this, you'll have to open the window so that you can get to the frame. Then, remove both the hinges at the top and bottom using a screwdriver, and then adjust the hinges clockwise or counter-clockwise. Once you've adjusted the hinges, close your window and check for fit. If you are happy with the fit of the window, tighten the screws to keep them in place.

If you can't reposition the hinges, you may need to replace the seal. Over time rubber seals can lose their elasticity and dry out, which causes their tightness to decrease. It is crucial to replace your seal as quickly as you can in order to keep your uPVC window watertight and draughtproof.

uPVC handles could also become loose. This is typically caused by screws that have been removed over time, but it can also be caused by the handle mechanism wearing out. It's a good thing that it's simple to fix the handle of a window that is loose yourself. The first step is to close your window and do an initial test fit. The corner joints of the sash should be aligned with the casing joint. If it doesn't then you can make use of a screwdriver to loosen the handle and turn the mechanism back into position.

3. Water Leaks

It is important to take action if you wake up every morning to discover mouldy walls and floors that are wet. The leaks of water from windows do not only lead to the degradation of your home's structure but also undermine your efforts to control the temperature in your home. The most common reason for leaking uPVC windows is that the sealant around the frame has been damaged or is missing.

This is a simple fix that can be completed by anyone who is a DIYer with the skills. Depending on the severity of the issue is, old caulking may need to be removed. It is essential to keep in mind that when it is about uPVC window repairs you should not be tempted to apply too much caulk and then make the area harder to clean and could decrease the efficiency of your energy usage.

Make sure that the drainage holes have no debris inside them and that the sill pan has been properly angled to drain away from the window. In more serious cases you may need to think about replacing the window.

Mold spots and rotted sills are also signs of water leakage. This fungus thrives in damp conditions and can spread quickly throughout the home.

If the leakage occurs between the double-glazed window, it is more likely that the problem is with the seal than the frame. A uPVC specialist can fix this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or are loose and open with a breeze it could be the hinges that are at the fault. These are easily repaired by any skilled DIYer and are usually completed in a matter of minutes.

Like all mechanical parts hinges are prone to wear out over time. The process of replacing a hinge on a window is an easy procedure, but it is simpler if you have someone to assist in holding the frame up.

It is also important to verify that the uPVC hinges are opening and closed in the right direction. You can do this by looking for the arrows on each hinge, this indicates which way the window should open.

The issue can be caused either by opening the window incorrectly or due to a poor installation in the factory. Sending us photos via our website is often enough to solve the issue. We are always happy to offer advice.

It is also essential to ensure that the hinges are lubricated regularly. This can be done by applying an oil that is light in nature to the hinges. We suggest using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regular lubrication will make the window easier to open and close. It can also stop corrosion and reduce the risk of sticking. This must be done at a minimum every year. WD40 and other solvent based oils are not recommended because they will damage parts of your uPVC window.

5. Draughts

Draughts in windows made of upvc can be caused by a few various factors. First, the hinges because of wear and tear, could become misaligned. This causes an opening to appear between the sash and the frame. This can be easily repaired by giving them good cleaning, but when they're beyond repair, it might be necessary to get them realigned or replaced. The interlock may be misaligned. This happens on the hinge's side, and could require to be cleaned. In some instances it is possible to replace them.

The seals may wear out or get damaged over time, allowing air escape. Replacement of these with high-quality weatherstripping will help to prevent draughts. Another option is to replace the upvc window with glass that is low-emissivity, which will help regulate indoor temperatures, and also reduce the risk of draughts.

Another, and most effective ways to reduce drafts is to use a draught excluder, these are typically fabric tubes that are filled with some kind of filler. They can be placed on top of your windowsill. They can keep your home warm by blocking out cold air.

With a little maintenance and repair windows made of upvc will continue to provide excellent security and insulation for your home. However, it is important to recognise that all windows have a lifespan and there may come a point where it is more efficient to replace them than repair them. If you are experiencing issues with your Upvc window, it's best to consult an expert as soon as possible.