Company Logo

• 목록
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC is a great choice for modern homes. They are easy to maintain and are durable and long-lasting. They are not susceptible to get rotten or rusty like timber and aluminum.

It is important to clean and oil UPVC windows and doors regularly. This will help prevent unnecessary repair costs and also improve energy efficiency.

1. Broken Glass

If the glass in your window has been damaged, it can cause a huge deal of damage to your home, which can make it very dangerous and potentially fatal. It is essential to make sure that your windows are in good shape.

For single pane windows it is relatively easy to replace them, and the new window is usually able to fit into the old frame very easily. However when you have double pane windows that are secured by internal beading it will be more difficult to take out the old panes and put in new ones. In this situation you'll need to locate some plastic spacers that will assist the new pane to fit properly into the window frame.

If you plan to attempt to remove the window panes yourself it is crucial to wear appropriate safety gear, including thick gloves and protective eyewear. It is also an excellent idea to lay down a drop cloth prior to when you start working on the glass to ensure that any shards will fall on the fabric rather than on the floor, where they could be trampled upon and cause further damage.

Once the glass has been removed, it's a good idea to cover the gap with some clear packaging tape or duct tape to prevent water and drafts from getting into the property until a professional is able to come out and fix the window. It also acts as a barrier to prevent any criminals from getting into your home. If the gap between the window and the door is significant, you may prefer an alarm system that has an opening. This will provide the best of both.

2. Sagging

uPVC windows and doors are a cost-effective energy efficient, durable and long-lasting alternative to timber windows with sash. However, over time, they are susceptible to a range of issues, including sagging. A window that isn't properly aligned can cause problems with light, draughts, and even security. It is crucial to act as soon as you realize that your uPVC windows are falling down.

Repositioning the hinges could aid in fixing a window that is sliding. You'll first need to open the windows to reach the frame. Then, using a screwdriver, you can take off the hinges on the top and bottom and adjust them by turning them clockwise or counter-clockwise. Close your window to test the fit after you have moved your hinges. If you are happy with the size of the window, tighten the screws to hold them in place.

If you are unable to reposition the hinges, you may need to replace the seal. As time passes, rubber seals lose their elasticity and dry out, which causes their tightness to decrease. If this happens, it's essential to replace the seal as soon as possible to ensure your uPVC windows are waterproof and secure from draughts.

uPVC handles may also become loose. This is usually due to screws that have become undone over time, but it could be due to the handle mechanism getting worn out. Luckily, it's not difficult to repair the loose uPVC window handle yourself. First, you'll need close the window and perform an initial test fit. The joint at the corners of the sash should align with the joint on the casing. If it isn't, you can use the screwdriver to loosen the handle. Then, you can turn the mechanism to position.

3. Water Leaks

It is essential to act if you wake up every morning to discover mouldy walls and wet floors. Leaks of water from windows can cause structural damage to your home and also hinder your ability to control the temperature inside your home. The most frequent reason for leaks in uPVC windows is that the sealant surrounding the frame has been damaged or missing.

This is a simple fix that can be completed by any DIYer who is competent. Depending on the severity of the issue is, the old caulking may have to be removed. It is important to keep in mind that when it is about uPVC window repairs, you should not be tempted to apply too much caulk in order to make the area harder to clean and can reduce your energy efficiency.

It is important to check that any drainage holes are free of debris and that the sill pan is angled in a way that allows it to drain away from the window. In more serious cases, you may need to replace the window.

Moldy sills and rotten ones are other signs of water leakage. This fungus thrives in humid conditions and can propagate quickly throughout the home.

It is also important to keep in mind that if the leakage is coming from between the glass of your double-glazed windows, it is more likely to be an issue with the glass seal rather than the frame or sagging. A uPVC specialist can fix this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

Hinges could be at fault for the reason that your uPVC window is difficult to open, or if it blows open with the breeze. They can be easily repaired by any DIYer who is skilled and can usually be completed in just a few minutes.

Like any mechanical component hinges are prone to be damaged over time. It is an easy process but it can be easier to do with someone else to assist in holding the frame in place.

It is also important to ensure that the Upvc Window Repair hinges are opening and closed in the right direction. You can check this by looking for the arrows on each hinge, this indicates which way the window should be opened.

The problem can be caused by opening the window improperly or by a poor installation in the factory. Sending us a picture via our website is often enough to solve the issue. We are always happy to provide assistance.

It is also crucial to grease the hinges on a regular basis. This can be accomplished by applying a light engineering oil on the hinges. We recommend using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regularly lubrication makes the window easier to open and close. It can also lower the chance of windows sticking and help prevent corrosion. Ideally, you should perform this every year. WD40 and other solvent based fluids are not recommended since they can damage the parts of your uPVC window.

5. Draughts

Draughts in windows made of upvc can be caused by different things. The hinges, also because of wear and tear, could become misaligned. This can cause a gap to form between the sash and the frame. These can be easily fixed by giving them a good cleaning, but when they're beyond repair, it could be necessary to have them realigned or replaced. The interlock, which is located on the hinge side of the window and can also be misaligned, and again it may be possible to give them a thorough clean, however in some instances it could be necessary to have these replaced.

The next common cause of draughts is the window seals. They are susceptible to being worn out or UPVC Window Repair damaged over time and will allow air to escape through the gaps. This can be avoided by replacing them with high-quality weatherstripping. Another alternative is to replace the window with low-emissivity glass. this will help in regulating indoor temperatures and again will reduce the possibility of draughts.

The last way to reduce drafts effectively is to use a draught-excluder. These are usually fabric tubes filled with a filler that can be placed over your window sill. These will help to block out cold air and keep your home warm and cosy!

Your upvc windows can remain a great source of insulation and security in your home with regular maintenance and repairs. It is essential to remember that all windows eventually wear out and it is cheaper to replace them than to repair them. If you are experiencing issues with your upvc window it is recommended to speak with an expert as soon as you can.