Company Logo

• 목록
• 게시판 리스트 옵션
  • 수정
  • 삭제

Repairs to uPVC Windows

uPVC windows are a great option for modern homes. They are easy to maintain, durable and long-lasting. As opposed to aluminium and timber they don't corrosion or rot.

It is important to clean and oil UPVC doors and windows regularly. This will reduce repair costs as well as increase energy efficiency.

1. Broken Glass

If the glass in your window has been damaged, it can cause a huge amount of damage to your home, which can make it extremely dangerous and possibly fatal. You should take the time to ensure that your windows are in good working order.

For single pane windows it is relatively easy to replace them, and the new window will usually fit inside the old frame very easily. However when you have double pane windows that are held in place by internal beading, it will be more difficult to take out the old panes and put in new ones. In this instance, it is necessary to purchase plastic spacers to help the new pane fit into the window frame.

If you are going to try to remove the glass panes yourself, it is essential to wear appropriate safety gear that includes gloves with a thick layer of material and protective eyewear. It is also recommended to lay down a drop cloth before you begin working on the window panes to ensure that any shards fall on the fabric and not on the floor, where they could be trampled under.

Once the glass has been removed, it's a good idea to seal the gap with clear packaging tape or duct tape to stop water and drafts from entering the property until a professional can come out and fix the window. It also acts as a barrier that will prevent any intruders to gain access to your home. If the gap between the door and the window is significant, you may want to use a security screen that also has an opening. This will provide the best of both.

2. Sagging

Upvc windows and doors are a low-cost energy-efficient, durable and long-lasting alternative to timber sash windows. However, over time they are susceptible to a range of issues like sliding. A window that is sagging can cause problems with light, draughts, and even security. If you find that your Upvc Window repair window is beginning to shrink, it is important to act swiftly to prevent the problem from getting worse.

Repositioning the hinges can help fix a window that is sliding. First, you'll need to open the windows so you can get at the frame. Then, remove both the top and bottom hinges using a screwdriver, and then adjust them clockwise or counter-clockwise. Close your window to check the fit after having moved your hinges. If you're happy with the fit, tighten the screws to ensure that they remain in the right place.

If you aren't able to move the hinges you may require replacing the seal. Over time rubber seals can lose their elasticity and dry out which causes their tightness to decrease. If this happens, it's important to replace the seal as fast as you can to ensure that your uPVC windows are waterproof and secure from draughts.

uPVC handles could also become loose. This is typically caused by screws that have loosened over time, but it can also be due to the handle mechanism wears out. It's relatively simple to fix a loose uPVC handle. First, you'll need to close the window and perform an experiment fitting. The joint at the corners of the sash must align with the joint on the casing. If it doesn't you can use a screwdriver to loosen up the handle. Then, you can turn the mechanism back into place.

3. Water Leaks

If you're waking up to wet floors and damp walls each time it rains it's crucial to take action. The leaks of water from windows do not only lead to the destruction of your home's structure but also hinder your efforts to regulate the temperature in your home. The most common reason for leaking uPVC windows is that the sealant around the frame is either damaged or missing.

This is an easy fix that can be done by any DIYer who is competent. Based on the severity of the issue the caulking used previously might need to be removed before a new layer can be put on. It is crucial to keep in mind that when it is about uPVC window repairs you should avoid the temptation to "over-caulk in order to make the area more difficult to clean and reduce the efficiency of your energy.

Verify that the drainage holes have no debris in them and ensure that the sill pan has been angled correctly to drain away from the window. In more extreme situations, you may have to replace the window.

Moldy sills and rotten ones are also signs of water leakage. This fungus thrives under humid conditions and can propagate quickly throughout the house.

It is also important to remember that if the leak is coming from between the glass of your double glazed window repairs near me-glazed windows, it is more likely to be an issue with the glass seal, rather than the frame or sagging. A uPVC specialist can easily fix this problem by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

Hinges may be to blame if your uPVC window is difficult to open, or if it opens with a breeze. Anyone who is a skilled DIYer can fix the hinges in a matter of minutes.

Nearly every home in the UK will have either top hung or side hung uPVC windows that use hinges and, just like any mechanical component they can wear down over time. It is essentially a simple procedure, but it is easier to do with someone else to assist in holding the frame up.

Make sure that the uPVC hinges are closed and open in the correct direction. Check for the arrows on each hinge to determine which direction the window should be opened.

The issue can be caused either due to opening the window repair in the wrong way or due to a poor installation in the factory. Sending us a photo via our website is often enough to resolve the problem. We are happy to offer assistance.

Regularly lubricating the hinges is essential. Applying an engineering lubricant that is light to the hinges is an ideal method of doing this. We suggest using the lubricant that doesn't contain solvents, like 3-in-1 Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. It can also prevent corrosion and decrease the chance of sticking. The ideal time to perform this every year. WD40 or other solvent-based oils should not be used since they can damage your uPVC windows.

5. Draughts

Draughts can be caused by different things. The hinges can also be disaligned as a result of wear, causing an opening between the frame and sash. This can be easily repaired by giving them good cleaning, but if they are beyond repair it may be necessary to have them realigned or replaced. The interlock, which is located on the hinge of the window and can be misaligned. Again, it's possible to just give them a clean but in certain cases, it may be necessary to have them replaced.

The seals may wear out or be damaged over time, allowing air to escape. Replacement of these with high-quality weatherstripping can help keep draughts at bay. Replace the windows made of upvc with low-emissivity glasses. This will help control indoor temperatures, and reduce the risk of draughts.

Another, and most effective methods to reduce the draughts in your home is to use a draught excluder, these are typically made of fabric that are filled with some type of filler. They can be placed on the top of your windowsill. They will keep your home warm by blocking cold air.

Your windows made of upvc will continue to provide excellent insulation and security for your home by performing regular maintenance and repairs. It is essential to remember that all windows will eventually get worn out and it is cheaper to replace them rather than repair them. If you encounter any issues with your Upvc window, it's best to consult a professional as soon as possible.